Tidal Power Plants - The Source of Ecologically Clean Energy
This paper outlines the development of tidal energy within the Soviet Union (U.S.S.R.). It describes several working and proposed tidal power plants developed in the U.S.S.R. with a discussion...
Estimation of Wave Power as an Energy Resource for Hawaii
One of the most important elements in determining the wave power available by means of a wave power extracting device is the amount of wave energy present at a given location during a...
Power Conditioning Options for Variable-Speed Ocean Energy Conversion Systems
As part of a recent wave energy feasibility study for the coast of North Carolina (SEASUN Power Systems, 1988), a survey was conducted of power conditioning and transmission technology....
Conceptual Design of an Open-Cycle OTEC Plant for the Production of Electricity and Fresh Water in a Pacific Island
A plant, based on the Open-Cycle Ocean Thermal Energy Conversion (OTEC) concept, was designed to supply electricity and fresh water to a Pacific Island community. In order to boost fresh...
Conceptual Design Analysis for Hybrid-Cycle OTEC Plants for Co-Production of Electric Power and Desalinated Water
Hybrid-cycle OTEC power plants are shown to be potentially the most flexible and cost effective in obtaining any specific mix of electrical power and desalinated water. This paper describes...
Pre-Experiments of OTEC Experimental Facility for Ocean-Based Mariculture-OTEC Pilot Plant Houyou
The ocean-based mariculture-OTEC pilot plant 'HOUYOU' was completed in March, 1989 and the at-sea test in Toyama Bay was carried out from July 18th until September...
A 250 KW Closed Cycle Land Based Ocean Thermal Energy Plant
The paper describes the design of a 250 KW land based closed cycle Ocean Thermal Energy Plant suitable for installing at Keahole Point in Hawaii. The work is being done for ALCAN International....
Seawater Experimental Results of Direct-Contact Condensation for OC-OTEC Applications
Tests of a direct-contact condenser (DCC) for open-cycle ocean thermal energy conversion systems (OC-OTEC) have been conducted using seawater and exchanging up to 1.25 MWth...
Protection of Wood Designs in Adverse Environments
Engineers and architects are becoming increasingly aware of the risks of poor wood design practices and the benefits of using wood properly. This paper addresses biological factors that...
Effect of Fly Ash on the Microstructure and Durability of Concrete
The influence of fly ash on the microstructure and durability of concrete was investigated. It was found that the use of 50% fly ash in concrete reduced greatly its resistance to freezing-and-thawing...
Permeability Effects on the Sulfate Resistance of Concrete
A laboratory study was conducted to determine the effect of permeability on the sulfate resistance of concrete containing fly ash. Concrete specimens were moist cured for 7 and 100 days...
Gateways to Understanding
Automating engineering design processes are crucial to the growth and the very survival of professional services providers. The need to enhance their competitiveness and the value provided...
Projects That Point
This is only a small sampling of what we can expect inthis decade. An $80 million kiln at Port Arthur, Tex., reportedly the largest of its kind in the U.S., handles bulk solids and sludges....
Structures Congress Abstracts 1990
Abstract only. The following themes are included: Rehabilitation and future challenges, Bridges, Earthquake engineering, Dynamic loads on structures, Metals and composite construction,...
An Overview of Structural Reliability Methods
Recent developments in structural reliability theory and better availability of load and strength data suggest that reliability-based design (RBD) methods should be considered as a practical...
Cambering of Steel Beams
Cold cambering with force in the fabrication shop is an effective and economical method of compensating for deflections of composite beams. Typical beams should be cambered for dead load...
Six Story Tubular Atrium
The author designed an atrium structure with two stair-stepped atriums placed at 45? to the tower 'Figueroa at Wilshire' in Los Angeles, California. This structure...
Variation in Design Practice for Lattice Towers
The design and analysis procedures employed for lattice transmission towers vary among countries, companies, and designers. This variation in design practice affects the relative reliability...
Modular Restoration Structures?A Versatile and Cost Effective Transmission Tool
Most electric utilities use a large variety of different types and designs of transmission structures. Because of this, it is not practical or economically justifiable for these utilities...
Optimum Design of Tapered Tubular Members
An algorithm for designing a tubular structural member with constant taper is presented. The design criterion is that the maximum absolute stress produced by a set of loading conditions...
Return to search