Design of Roller Compacted Concrete Pavements
This paper reviews some of the differences between roller compacted concrete and conventionally constructed concrete pavements. These differences require additional consideration during...
Design of Ash Basin Dike across Cove
Embankments built over soft, unstable foundation materials had required that the materials either be removed or reinforced. With the introduction of geotextiles, it is now economically...
Low Permeability Liners Incorporating Fly Ash
This paper summarizes the results of a research study undertaken at West Virginia University to evaluate the feasibility of utilizing stabilized fly ash as a low permeability liner material....
Mechanisms of Subsidence Induced Damage and Techniques for Analysis
Structural damage due to mining induced subsidence is a function of the nature of the structure and its position on the subsidence profile. A point on the profile may be in the tensile...
Reliability Based Analysis of Contact Problems
The S.B. Batdorf model is modified to include the reduction in shear due to the effect of compressive stresses on the crack face. This new formulation was used to obtain the probability...
Probabilistic Model for Stability of Slopes
Presented herein is a probabilistic model based on derived distributions to predict shear strength of soils and the safety factor of slopes considering uncertain properties of soil, namely:...
Bridge Reliability Evaluation Using 3-D Analysis and Damage Scenarios
This paper reports analytical investigations into the system strength and reliability evaluation of existing bridges using 3-D inelastic analysis and damage scenarios. In this context,...
Damage Accumulation Models for Bridges
In the study summarized in this paper the serviceability and ultimate limit states were reviewed for concrete and steel girder bridges. A model is proposed to evaluate strength and remaining...
Reliability of Cracked, Prestressed Girders
For prestressed concrete structures in non-aggressive environments or where corrosion-protected prestressing strands are used, it may be possible to allow flexural cracking into the precompressed...
Applying the Time-Reliability Equation
This paper presents a methodology for rigorously including time-varying elements of reliability through the use of the time-reliability equation. An example reliability analysis which...
Quantifying Quality Improvement Programs
Structural codes are evolving to a limit state design basis in which the safety checks are derived from the underlying probability distributions of strength and loads. An example safety...
Fatigue Reliability of Ship Hull Girder
Based on estimates on uncertainties in wave loading and fatigue capacity the fatigue reliability of ship hull girder is calculated with respect to global vertical wave bending moment....
Diffusion Models of Crack Growth Due to Random Overloads
Stochastic diffusion models of crack growth are developed, reflecting uncertainty in applied loading and residual stresses near the crack tip. Applications are shown to (1) random vibration...
Dilatometers Settle In
The benefits of the dilatometer test DMT are described. This geotechnical in situ testing tool was developed and patented by an Italian professor and engineer named Silvano Marchetti....
Priority Integrated Pipe Evaluation
The selection of the most suitable pipe for a given site involves the consideration of many factors affecting pipe performance. The factors to consider in sewer pipe evaluation and selection...
Soil Parameters for Design of Buried Pipelines
This paper presents the table of recommended design parameters for soil, shows their physical significance, and compares the resulting stiffness and strength for the variety of soil and...
A Multilayered Model for Analysis of Composite Pipes
A multilayered model is developed to analyze the behavior of composite pipes, such as prestressed concrete pipe, to the combined effects of internal pressure and applied loads. The pipe...
An Investigation of Field Performance of Reinforced Plastic Mortar Pipes
Every year many new pipe materials appear on the market for various applications. One of the important factors the design engineer and the user should consider while evaluating new products...
Cables in Trouble
Having inspected more than half of the world's cable stayed bridges, the authors conclude that many are in danger of sudden collapse unless corrosion problems can be stopped....
The Heavy Duty Geogrid Wall
The geogrid reinforced soil retaining wall was a key component in reconstructing a small hydroelectric plant situated at the center of Cascade Dam in Michigan. It was necessary that the...
Return to search