Seismic Acceleration Maps for Oregon
To evaluate the seismic hazard for the Corps dams in the Portland District, operating basis earthquakes (OBE) and maximum credible earthquakes (MCE) were established for seismic zones...
Earthquake Risks to Utah Water and Gas Systems
Designed to guide local earthquake hazard reduction programs, this study estimates direct aggregate earthquake damage to Davis and Salt Lake County utilities. For making these loss estimates,...
Seismic Risk Assessment for a Utility System
Presented is a procedure by which a utility could develop the probabilities for different levels of capital loss exposure for its system. The procedure relies on experience data obtained...
Seismic Risk Analysis of LNG Storage Tanks
This paper presents an approach to the seismic safety review of existing LNG storage tanks. The approach considers the seismic hazards from ground motion, surface fault rupture, and soil...
Seismic Risk Analysis System
The Seismic Risk Analysis System was developed to model the expertise of experienced engineers and researchers and to provide consultation to the users. The Seismic Risk Analysis System...
Precast Roofs for Blast Shelters
A shallow-buried reinforced concrete blast shelter has been constructed and dynamically tested at the U. S. Army Engineer Waterways Experiment Station (WES). Three thicknesses of precast...
Seismic Behavior of Long-Span Cable-Stayed Bridges
Special features of the earthquake-response analysis of cable-stayed bridges, subjected to multiple-support excitation, are presented including a basis for calculation of seismic forces...
Seismic Response Analysis of Two Major Bridge Structures
The seismic response analyses of two major bridge structures have been conducted. In these two bridges, portions of the piles are either submerged in the water or free-standing within...
The Earthquake Barrier
The earthquake barrier protects buildings from the horizontal ground vibrations of an earthquake by installing a 'force barrier and an energy barrier' at the...
Comparative Seismic Response of Damped Braced Frames
The behaviours of braced steel building frames with friction joints and with eccentric bracing, under seismic forces, are compared. Nonlinear time history dynamic analysis is used. Friction...
Nonlinear Response Combination in Seismic Analysis
Simple, approximate methods are developed to evaluate the maxima of response measures which are nonlinear functions of modal responses to seismic input. Examples for such response quantities...
Ambient Vibration Testing of the Foothill Communities Law and Justice Building
This paper presents the results of two ambient vibration tests conducted on the Foothill Communities Law and Justice Center Building. One ambient test was performed in 1985. The second...
Blasting Densifies Sand
Constructing the Jebba Dam on Nigeria's Niger River required in-place densification of large volumes of loose sand to record depths of up to 131 ft. Vibrocompaction was used...
Lifeline Seismic Risk Analysis?Case Studies
These papers employ design concepts and procedures in lifeline seismic risk analysis. Two of the papers describe the seismic hazards in the northwestern United States. A systems model...
Landslide Investigations Using the Weight Penetrometer
The weight penetrometer is a light weight device and can be easily deployed on slopes not accessible to conventional exploratory tools such as drill rigs or cone penetrometers. The weight...
Strength of Fine-Grained Soils Using the Piezocone
Evaluation has been made of several theories and methods for deducing the undrained and effective stress strength of saturated fine-grained soil from piezocone test results. Bearing capacity...
Laboratory and Field Evaluation of Cone Penetrometers
Cone penetrometers from 8 organizations have been studied by performing laboratory tests and field tests. The testing show that pore pressure and temperature zero shift affect significantly...
Effctive Stress Interpretation of In-situ Tests
Significant differences in terms of load-settlement curves obtained from Plate Load Tests (PLT) and q//c profiles obtained from Static Cone Penetration Tests (SCPT) at two sites with different...
Rapid Assessment of Seismic Vulnerability
The choice of a seismic damage assessment method depends fundamentally on how the assessment will be used, but always involves definition of the expected ground motion and the structure...
ATC Methodology and Data for Rapid Assessment of Seismic Vulnerability
Recently developed Applied Technology Council (ATC) methodology and data provide a technical basis for rapid assessment of structure seismic vulnerability. Methodology developed under...
Return to search