Discrete Element Simulation of River Ice Jams
The discrete element method provides an alternative to traditional analytical and experimental methods for studying river ice transport phenomena. In the discrete element method, the movement...
Water Supply and Aeration Demands for Shrimp Farms
A computer model was developed simulating flow and aeration requirements for a range of farm sizes, from 50 to 2000 hectares. Climatic effects and water quality upset conditions were included...
A Mathematical Model for Transport and Mixing of Oil Slick in Rivers
A two-layer two-dimensional mathematical model for transport and mixing of oil in rivers is presented. In this model, oil in the river is considered to consist of a surface slick moving...
Soluble Pollutant Enrichment in Snow Covers
A mathematical model is presented to simulate enrichment of soluble pollutants in snow covers. The model is based on the liquid water flow, heat transport, and pollutant transport equations....
Forces Acting on a Vortex-Excited Vibrating Cylinder in Planar Oscillatory Flow
An experimental investigation into the vortex-excited vibration of a circular cylinder in planar oscillatory flow has been made with emphasis being placed on the amplification of the forces...
Modeling of Surface Vortices in Unsteady Flow
Hydraulic model studies of lock filling and emptying systems include investigating vortex tendencies at the intake vincinity during filling. The flow at the intake vicinity is unsteady...
A Branched Mass Transport Model of the Sacramento-San Joaquin Delta, California
A new branched mass (salt) transport model is used to simulate salt transport in the Sacramento-San Joaquin Delta, California. The model uses a two-step procedure to determine the salt...
A Computational Analysis of Dynamic Interaction of Dam with Reservoir Water and Sediment
A two-dimensional model of porous media is employed to calculate the reduction of the onset hydrodynamic pressure with the bulk modulus of pore water in reservoir sediment. However, the...
Physical Modeling Study of the Niagara River Plume
A rotating laboratory facility is used to study the dynamics of the Niagara River discharge into Lake Ontario. The current tests are limits to buoyant discharge conditions, which occur...
A Hybrid Model for Sediment Concentration Profiles
The paper discusses the deficiency in the existing theories on suspended concentration profiles which is due to the variations of theories for modeling the velocity profiles. As can be...
Experimental and Numerical Study of Overland Flow Induced by Rainfall on the Loess Slope
Based on the repeated experiments of overlad flow on the Loess slope under the condition of constant and variable artificial rainfall intensity in laboratory, the mathematical model corresponding...
Synthetic Calibration of a Rainfall-Runoff Model
A method for synthetically calibrating storm-mode parameters for the U.S. Geological Survey's Precipitation-Runoff Modeling System is described. Synthetic calibration is accomplished...
Failure Modeling of Hydraulic Systems
Techniques of survival analysis are investigated for modeling the failure of hydraulic systems. The Proportional Hazards Model has the advantage of being able to separate the effects on...
Optimal Design of Highway Drainage Structures
Hydraulic design of a bridge or culvert using a risk-based approach is to choose among the alternatives the one associated with the least total expected cost. In this paper, the risk-based...
Conceptual Evaluation of Dam Safety by Instrumentation
The criteria governing the design of dams can frequently be imprecise. One of the most practical methods of evaluating dam safety in the dam safety surveillance programs is to check the...
Conservativeness in Hydraulic Engineering Studies
Hydraulic engineers routinely make a variety of assumptions during the course of a study. Assumptions, once made, usually become incorporated into the fabric of the study and are seldom...
Stability Criteria for Revetments
A simplified 'black box' approach is presented for a number of revetment systems for banks and shore protection. The design criteria, based on the physical similarity...
The Influence of Uniformity on Riprap Stability
Studies have shown that size uniformity influences the stability of riprap. The ratio of fractional sizes of the riprap mixture, D60/D10,...
Design and Construction of Soil-Cement Drop Structures
Soil-cement has been used as an effective and economical slope protection material for embankment dams and stream banks. This paper describes the use of soil-cement in the construction...
Characteristic Deformation of Alternate Bars Due to Low Flow
Experiments on the formation of a small meander-channel at low stage are conducted by supplying a proper discharge on initial bed of alternate bars that have been formed in experimental...
Return to search