Programmable mMicroprocessors in Local Control of Hydro Power Plants
The main purpose of the control equipment is to provide the generator with means for operation of the power station equipment. There is a need for status information on the generating...
Probabilistic Prediction of Pile Group Capacity
A reliability analysis of a group of free standing piles in clay is carried out using Monte Carlo simulation. The pile material strength, soil capacity, and the load on the pile group...
Prediction of Concrete Creep and Shrinkage by Sampling on the Basis of Correlated Random Material Parameters
There are many random parameters which influence creep and shrinkage of concrete. In all of the previous probabilistic studies the parameters are assumed to be mutually independent random...
Effects of Random Material Properties and Loads
The variability of slab deflections is estimated from analytical expressions accounting for random variations of spatially distributed loads and material properties (stiffness parameters)....
A Tower-Like Structure with Distributed Stiffness, Mass and Plastic Zones Under Random Earthquake Loading
Random vibrations of an elastoplastic structure are treated by taking into account the finite spread of plastic zones as well as the effects of distributed mass and stiffness. Solution...
Quantifying Quality Improvement Programs
Structural codes are evolving to a limit state design basis in which the safety checks are derived from the underlying probability distributions of strength and loads. An example safety...
Rainflow Cycles in Nonstationary Gaussian Processes
This paper develops a methodology for calculating the probability distribution for rainflow cycles in a nonstationary Gaussian process. The up- and downcrossing rates are estimated for...
Efficient Probabilistic Structural Analysis Using an Advanced Mean Value Method
An advanced mean-value (AMV) method for probabilistic structural analysis is presented. This method blends the conventional mean value method with the advanced structural reliability analysis...
Reported Results from 600 Cloud Seeding Projects
The authors conclude that cloud seeding is an effective way of increasing precipitation when applied to the appropriate clouds and climate. Reported results from research projects show...
Statistical Modeling of Space-Time Data
A common practice in hydrogeology is to draw contour lines to depict the occurrence of spatially distributed (i.e., regionalized) variables such as groundwater elevations, aquifer properties...
New Installation Designs for Buried Concrete Pipe
The rational development of new installation designs for buried concrete pipe is described. Over 100 analyses were performed using a new computer program named SPIDA (Soil Pipe Interaction...
Stable Channels with Loose Boundary
Recently, G. Parker suggested that the lateral transport of downstream momentum due to Reynolds stresses should be included in the momentum balance used to calculate the boundary shear...
Design Depths and Velocities on Alluvial Fans
Under Federal Emergency Management Agency (FEMA) guidelines, flood depths and velocities on alluvial fans are determined by considering the probability of a given point on the alluvial...
Computations of High-Velocity Flows on Alluvial Fans
The results of numerical models of supercritical flows on alluvial fans demonstrate the strong effect fan topography has on flow velocity and depth. Particularly important are transverse...
Microstructure of Cohesive Sediment Suspensions
In a shear flow field suspended fine sediments under relatively low concentrations and stable stratification conditions develop a step-wise profile. This is due to internal wave instability...
Comparison of Vertical Velocity Measurements in the Great Lakes Connecting Channels with Theoretical Profiles
Vertical distribution of velocities was measured with an upward looking acoustic Doppler current profiler in the upper St. Clair River during November 1984 - April 1986 and the Detroit...
Hydraulic Design for La Quinta Stormwater Project
An upstream detention basin was designed to trap debris and attenuate flows into Bear Creek Channel. The high velocity supercritical flow made a one side bank protection design for the...
Stochastic Characteristics of Cobble-Gravel Bed Load Transport
Prototype tests of stochastic characteristic of cobble-gravel bed load transport have been done in Dujiangyan reach of Minjiang River in China in 1977-1985. All of 718 sample data from...
Runoff Probability Distribution Characteristics
The probabilistic relations of an elemental rainfall - runoff process are analyzed. The elemental process is defined as runoff from a uniformly sloping impervious plane due to uniform...
Stochastic Streamflow Sequences for Reservoir Operation and Design
A stochastic streamflow model is adapted for risk methodology in the operation and design of reservoirs. The model is based upon the representation of the flood series as a Poisson counting...
Return to search