Instream Flows According to the ASCE Model State Water Code
The ASCE Model Water Code provides two mechanisms for protecting instream uses of water: reservations and water management areas. Implementation might be difficult unless the relation...
Hydrologic Analysis of Leveed Interior Areas
Flood damage reduction projects that include levees or flood walls usually involve special problems associated with isolated interior areas. Storm runoff patterns may be altered and remedial...
Global Approaches for the Nonconvex Optimization of Pipe Networks
Because the pipe network problem is nonconvex, two global search schemes, MULTISTART and ANNEALING, are employed to permit a local optimum seeking method to migrate among various local...
Monthly Water Balance for Blue Nile River Basin in Ethiopia
The objective of this study was to present existing stream flow data for the Blue Nile River and tributaries within the Blue Nile River basin in Ethiopia and to use that data to provide...
Water Use Pattern of Residential and Commercial Customers
The availability of the Automatic Meter Reading (AMR) devices make it possible to read a large number of meters in a short period of time. Through the use of AMR, we monitored weekly water...
Low Flush Plumbing Fixtures and Wastewater Systems
The significance of low flush plumbing fixtures on the wastewater collection and treatment system serving a small community has been determined. Among the concerns studied were: functional...
Use of a Statistical Model to Forecast Future Wastewater Flows
Future wastewater flows are generally predicted based upon an assumed rate of population and industry growth within a treatment facility's area of influence. In a community with limited...
Seasonal Rates?The Pros and Cons: A Case Study
The Spring Valley Water Company, an investor owned water utility serving over 58,000 customers in Rockland County, New York, implemented a seasonal differential rate structure in 1980....
Optimal State Feedback Estimation in Groundwater: Application to Leaky Aquifers
The problem of groundwater flow in leaky aquifer is looked at from a stochastic point of view. Optimal estimation of hydraulic heads are achieved using Kalman filtering. The Kalman filtering...
Flow Investigation for Landfill Leachate
A two-dimensional unsteady-state moisture flow model has been developed in order to describe the leachate flow process in a landfill. The unsteady variation of leachate mound head has...
Continuous Simulation Modeling for Sewer Systems
The peaking-factor method of sanitary sewer design was developed to simplify the calculations in determining design flow rates. This method of analysis is conservative to the point that...
Managing Stormwater with a Microcontroller Operated System
Concepts of managing urban stormwater runoff with a microcontroller operated flow control system are presented. The microcontroller system allows flexible and precise flow control from...
A Raft System for Large River Hydraulic Measurements
Collection of hydraulic data in large rivers is a difficult, time consuming, and occasionally perilous task. High water velocities, considerable depths, and wide channels present obstacles...
The 3D Approach to Design
Designing directly in three dimensions, including integrated analysis and information flow, is a powerful way to enhance civil engineering capabilities. Yet, relatively few have taken...
Thin-Walled Finite Element for Curved Multicell Box Girders
The generalized Vlasov's thin-walled beam theory was combined with the finite element technique to develop a new curved thin-walled multicell box girder finite element which can model...
A Generalized Three Invariants Cap Model and its Numerical Implementation to Study Soil-Foundation Interaction
This paper presents a modified cap model that is capable of characterizing cyclic stress-strain behavior of soils and describing variation of shear strength along various stress paths...
Simulation of ATIS Strategies to Mitigate Special Event Congestion
This research extends the performance and application of DYNASMART, a dynamic traffic simulation model which incorporates the three elements necessary for modeling traffic flow under information:...
Study of a Computer System for Evaluation of Bearing Wall Stresses in Structural Planning ? Reasoning by Neural Network
This report proposes a reasoning system for bearing shear wall stresses in the ultimate state by using geometrical data of buildings and shear walls at the initial stage of aseismic structural...
Cycletime Simulation of Shield-Tunneling Operation
Computer simulation...
Graphical Resource-Based Object-Oriented Simulation for Construction Process Planning
Simulation is a powerful tool for construction process design and optimization. The results of a simulation provide detailed process information, such as resource utilization and idleness,...
Return to search