ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Biological Evaluation of Angled Screen Test Facility
The paper presents comparisons of model and prototype measurements as a means for evaluating the ability of a physical model to reproduce a geometrically complex prototype thermal intake...

Hydrothermal Model Study of Stratified Flow in a Power Plant Cooling Water Recycle/Intake Canal: Reynolds and Densimetric Froude Number Effects
During the winter of 1983-1984, the control of frazil ice at the trash tracks using pneumatic air guns was evaluated at Danskammer Point Generating Station. This paper presents a brief...

Intakes for Low Head Hydro Plants
The design of hydro intakes is usually based on a desire to achieve low intake losses and an acceptable approach flow distribution to the turbine. Generally, velocities in the intake canal...

Hydraulics of Broad Crested Weirs
The paper presents a general, basic discussion of the title subject. It begins with a definition for the broad crested weir and analytical concepts. Subjects covered subsequently include...

Velocity Distribution Factor Constraints
It has been customary to introduce the velocity distribution factors alpha and beta into the energy and momentum equations so as to avoid the integration associated with variations in...

Girth Weld Defect Tolerance Criteria
This paper describes the following criteria proposed for setting allowable defect sizes in girth welds: PD 6493:1980, 'Guidance on Some Methods for the Derivation of Acceptance...

Performance Prediction for Removal of Odorous Organics From Drinking Water by Adsorption
The authors address three questions: What do packed bed filters remove from suspension in water treatment plants? How do they accomplish this removal? How can this knowledge be used in...

Particles, Pretreatment, and Performance in Water Filtration
Relationships among raw water quality, pretreatment facilities, and the design of packed bed filters are presented and applied. The particle size, particle concentration, particle surface...

Effects of Streambed Processes on Interaction Between Surface and Groundwater
In open channel systems, the phenomena commonly referred to as 'clogging' is caused by settling of sediment and straining of suspended material as water moves...

Strength of Soils in Terms of Effective Stress
The factors that determine soil strength, such as amount of confinement, density, particle size distribution, mineral friction, aging, particle crushing, and others, produce their effects...

Advances in Short Span Steel Bridges
Applying recent research to the design of short span steel bridges can lower their cost and maintenance. Such research involves improved limit state criteria, more uniform lateral load...

Pipe Laying Comes Out of the Trenches
Recent developments have shown that trenchless construction offers an effective and economically attractive alternative to conventional excavation. These findings are especially important...

An Extreme-Value Model for Strength of Stiff Clays
The role of the distribution function in the safety analysis of soil structures is briefly discussed. Comparison of the two statistical distributions - normal and Weibull - reveals that...

A Pseudo Response Spectrum Method for Mark I Loads
A pseudo base motion response spectrum method is developed to uniquely evaluate the periodic condensation oscillation and chugging drag loads that may occur on submerged structures within...

Stress Distribution Around the Equipment Hatch Opening of a Prestressed Concrete Containment for a PWR Power Station
Results are reported of a finite element stress analysis for the linear elastic deformation around the equipment hatch opening in prestressed concrete containment. The dimensions and form...

Design of Thin Wall Reinforced Concrete Pipe Using Dimension Ratio (DR)
Dimension Ratio is defined as the ratio of the internal pipe diameter to the pipe wall thickness. The Caltrans culvert research leading to the development and use of the Dimension Ratio...

Performance of Low Stiffness Plastic Pipe in Stiff Soils
Large diameter pipe made from ductile plastics, such as polyvinyl chloride (PVC), polypropylene (PP) and high density polyethylene (HDPE) can be effectively utilized in subsurface installations...

Particle Interaction and Stability of Suspended Solids
The physics of particle interaction, which is responsible for the problem of the apparent tardy settling of suspended solids in tailings discharge slurries containing initially low concentrations...

Waste Phosphatic Clay Disposal in Mine Cutsr
Research was undertaken to assess the applicability of waste clay disposal back into phosphate mine cuts. The pit was monitored for two years with measurements of clay surface elevation,...

Influence of Roughness on Velocity and Dispersion at Low Flow
Dependence of the hydraulic and transport characteristics of low flow on channel roughness is investigated. Empirical expressions are used to estimate roughness coefficient as a function...

 

 

 

 

Return to search