ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

The Radiological Capacity of Transport Casks Loaded in a 2-Region Non-Uniform Pattern
The radiological capacity of spent fuel storage and transport casks can be increased by the use of non-uniform cask loading. There are many possible combinations of spent fuel burnup and...

Dry Spent Fuel Storage in the 1990's
In the United States, for the decade of the 1990's, at-reactor-site dry spent fuel storage has become the predominant option outside of reactor spent fuel pools. This development...

A Proposed Regulatory Guide Basis for Spent Fuel Decay Heat
A proposed revision to Regulatory Guide 3.54, 'Spent Fuel Heat Generation in an Independent Spent Fuel Storage Installation' has been developed for the U.S. Nuclear...

Evaluation of Storage/Transportation Options to Support Criteria Development for the Phase I MRS
The Department of Energy's (DOE) Office of Civilian Waste Management (OCRWM) plans to develop an interim storage facility to enable acceptance of spent fuel in 1998. It is...

Downstream Danger from Sudden Discharges of Water
The sudden, unexpected release of water by hydropower facilities poses a threat to fishermen and boaters immediately downstream. The characteristics of the danger can be identified, however,...

Field Measurement of Surface Flows in Shallow Estuaries
This paper summarizes our first-year results of an ongoing multi-discipline project, which examines the physical processes of wetlands erosion and loss in coastal Louisiana. Our task is...

Flushing Characteristics for Harbor Planning
A two-dimensional hydrodynamics model was used to understand the circulation and transport patterns in Keelung Harbor, Taiwan. The calculated hydrodynamics information was used to determine...

Wave Motion in Aerated Rubble Mounds
Experimental investigations were undertaken to study the effect of air entrainment on wave motion in rubble mounds. The study is aimed at the understanding of the processes associated...

CSO Pollution Abatement Project Performance
The City of Trenton, NJ combined sewer overflow (CSO) pollution abatement project has been in operation for more than four years. Daily records include composite BOD₅...

Field Investigation for Leachate Flow in a Landfill
Field investigation for leachate flow was done for the Fresh Kills landfill at Staten Island, New York. The leachate monitoring program included data collection from the field for a six...

An Alternate Formulation of Time as a Decision Variable to Facilitate Real-Time Operation of Water Supply Systems
With the advent of a new focus on energy conservation and the availability of cost efficient computer technology, many water utilities are investigating new ways to improve the efficiency...

A Control Method for On-Demand Operation of Open-Channel Flow
This paper proposes a control system for the automatic operation of an open channel having upstream and downstream gates. The main issue is the use of a discrete-time algorithm which computes,...

Comparative Performance of Spectral and Parametric Numerical Wave Prediction Models in Lake Michigan
Four different numerical wave prediction models are used to hindcast wave conditions in Lake Michigan for a 10 day case in October, 1988. Results are compared to observed wave height and...

Gas Phase Turbulence Modification with Fine Particles in 2-D Duct Flow
The effect of a dilute suspension of fine particles on a two-dimensional turbulent duct gas flow is measured with hot-film anemometry. The flow field without particles is compared to the...

Computation of Flow Fields Induced by Hydroplant Releases into Lower Lock Approaches
A turbulence-based computational procedure was developed and applied to the prediction of flow fields in navigation installations induced by hydropower releases. The procedure uses a depth-averaged...

In-Vitro Measurement of Static Contact Pressure Distribution in Synovial Joints
The objective of this presentation is, at first, to review the various approaches to the measurement of contact pressure distribution in synovial joints, and then to describe the development...

Strain Rate Effects on Pressuremeter Testing
This paper discusses the effect of strain rate on the cavity expansion problem and pressuremeter test. A cuboidal shear device, CSD, was used to perform pressuremeter strain path tests...

Statistical Evaluation of CPT and DMT Measurements at the Heber Road Site
A series of field tests were conducted at several sites in the Imperial Valley, South California from 1983 to 1985. The field testing program included cone penetration, dilatometer, standard...

The Pressuremeter: Some Special Applications
The preboring pressuremeter has been used for foundation design for many years. Some recent developments are presented which extend the applications of the pressuremeter. These developments...

Plate Load and Pressuremeter Testing in Saprolite
On the island of Oahu, Hawaii, an exploratory tunnel for the Interstate Route H-3 highway was completed in December 1989. The purpose of the exploratory tunnel was two-fold; first to locate...

 

 

 

 

Return to search