Every Penny's Worth
Value engineering has been used in the construction industry since the 1960s, but highway projects have sometimes been thought of as too simple for VE studies. Now, with the increasing...
Seismic Design for Port of Los Angeles, 2020 Program
Due to the Port of Los Angeles' (POLA) importance as a regional hub for transportation and commerce and the potential for a major seismic event in the Southern California...
Regional Risk Assessment of Environmental Contamination from Oil Pipelines
This paper presents a methodology for assessing the risk of environmental contamination from oil pipeline leaks due to earthquakes. Risk is measured both as volume of oil released and...
Design of Substation Foundations for Liquefaction
When substation foundations penetrate liquefiable strata within risk prone seismic regions, the potential loss of support must be evaluated with state-of-the-art methods to determine foundation...
Investigating Fault Rupture Hazards: An Example from the Wasatch Fault Zone, Utah
The Kern River project consists of a 36-inch diameter high-pressure natural gas pipeline, to be constructed from southwestern Wyoming to southern California. The alignment crosses several...
Seismic Hazard Analysis of Buried Pipeline for Design
This paper concerns mainly the following three items on seismic hazard analysis of buried pipeline for design: (1) effects of pipeline length on risk, (2) effects of local site conditions...
Wellington's Lifelines in Earthquake Project: An Outline of a Major Review
This paper outlines a project involving a major review of all lifelines including building services in the region of Wellington, New Zealand. A case study approach was used involving representatives...
A Methodology for Assessing the Risk of Hazardous Materials Release Following Earthquakes?A Demonstration Study for the Los Angeles Area
A methodology for estimating the risk of post-earthquake hazardous materials releases was developed for the National Science Foundation and the National Center for Earthquake Engineering...
Seismic Vulnerability Assessment of Bridges on Earthquake Priority Routes in Western Kentucky
This paper discusses the current conditions of 203 bridges on the priority routes in Western Kentucky and their vulnerabilities to earthquakes. A span-loss type of bridge collapse due...
Evaluation of Automatic Earthquake Shutoff Valve Performance and Recommendations for Future U.S. Standards
Increasing interest of local and state government has developed in recent years regarding legislation requiring automatic shutoff valves for natural gas lines as well as lines containing...
Post Earthquake Investigation Team
The CALTRANS Post Earthquake Investigation Team (PEQIT) has been in existence since 1971. It is an emergency response team which mobilizes quickly following a major earthquake to gather...
The Design and Construction Aspects of the Structure Research Tests at Cypress Viaduct
A research program is described whose task was to gather information about the inherent strengths and weaknesses of the existing Cypress bridge structure and to evaluate the effectiveness...
Collapse of the Cypress Street Viaduct
This paper is being presented by the Division of Structures, Post EarthQuake Investigation Team (PEQIT) on the collapse of the Cypress Street Viaduct in the City of Oakland, California,...
Lessons Not Learned from the Catastrophic Collapse of Highway Structures in the 1989 Loma Prieta Earthquake
Most of the damage sustained from the 1989 Loma Prieta Earthquake in Northern California was not a surprise to civil engineers and knowledgeable building officials. As early as the 1900s,...
Measuring Section-Related Traffic Data by Correlation Methods?A New Approach to Traffic Monitoring and Control
Traffic monitoring and control systems require reliable realtime data on traffic flow for an efficient performance. A new 'class' of data, the so-called section-related data such as journey...
Inductive Loop Detection/Testing with DSP Techniques
Vehicle traffic control is recognized as an effective way to relieve mounting traffic congestion in large urban areas across the country. The most common method of vehicle detection is...
Analysis of Roadside Equipment and Central Facilities for Innovative Driver Information and Traffic Control Systems
Following a top down analysis of a selected set of innovative RTI functions, we identify in this paper the requirements and characteristics of the roadside equipment and central installations...
Traffic Reporter is a PC-based graphical, interactive, traveler information system being developed to meet the informational needs of Seattle-area commuters. The goal of Traffic Reporter...
SINOD?A Location Reference Tool for Road Information Systems
This paper focuses on the setting up of a location reference system - named SINOD - envisaged as a basic requirement for on going actions and for expected developments in the field of...
Continuum Modelling of Traffic Dymamics
Two new efficient higher-order continuum models are proposed to improve modelling of traffic dynamics. The new models do not require the use of an equilibrium speed-density relationship,...
Return to search