Evaluation of Two-Stage Outlet Hydraulics
A two-stage detention basin is an effective storm water management tool. This type of basin is designed to control two storm events and it will tend to perform better than a single-stage...
Detention Pond Outlet Design for Pollution Control
Stormwater runoff detention ponds were originally developed for the control of flooding and the designs of the outlet control structure must be modified to obtain pollution control objectives....
A Three Dimensional Hydraulic Jump
A study is conducted to define the three-dimensional hydraulic jump that occurs in a rectangular channel downstream of a rectangular contracted sluice gate. A sequent depth ratio equation...
Avoiding Cavitation Damage to Hydraulic Structures
Cavitation damage often may be avoided by not allowing cavities to form. Where boundaries are not deeply submerged, their shape must be exactly correct, irregularities must be very small,...
Prototype Studies of Corps of Engineers Structures Experiencing Cavitation Damage
A number of Corps of Engineers structures have sustained damage caused by the occurrence of cavitation. The damage has varied from slight pitting to severe erosion. The damage has occurred...
Aeration is the Solution for Sluice Cavitation Damage at Libby Dam, Montana
Cavitation has severely damaged two of the high-head flood control sluices. The damaged areas were immediately patched; however, these patches were not considered a solution to the problem....
Laboratory Studies of Cavitation in Corps of Engineers Hydraulic Structures
A selected bibliography of significant hydraulic laboratory research efforts by the U. S. Army Engineer Waterways Experiment Station to identify the likelihood of and means of preventing...
Movable-Bed Model Investigation of Littoral Drift on the Intake and Outlet of Lin-Kou Power Plant (I)
The establishment and operation of a distorted movable-bed model of the cooling water intake and outlet is described. The model employed is a three-dimensional movable-bed Froude model...
Modeling of a Multifunctional Hydraulic Structure
A 1:12 scale Froude model of a hydraulic control structure in the Rochester Combined Sewer Overflow Abatement Program (RCSOAP) was constructed and tested to optimize the design requirements...
Controlling River Ice to Alleviate Ice Jam Flooding
Many communities affected by ice jam flooding have accepted the event as unpreventable. Others have approached their problem as one of open channel flow and implemented standard projects...
Modeling Intake Performance Under Frazil Ice Conditions
A water intake was modeled in a refrigerated flume in an active frazil icing environment in order to evaluate alternative modifications to the prototype structure. Tests were run until...
Fisheries Engineering Program at Washington State University
Problems associated with the interrelationships of instream hydraulic structures, and migratory and resident fish, are in need of better analysis and design. This improvement can be realized...
Modifications of Dams for Recreational Boating
Many existing dams and river structures require modification, and new structures may need to include designs to allow safe white water activities. The basic problem is safety, with a long...
Current Hydraulics Research at the Iowa Institute of Hydraulic Research
The Iowa Institute of Hydraulic Research is engaged in fundamental and applied research on a broad range of fluid mechanics and hydraulics problems. The history and organization of the...
Bureau of Reclamation Hydraulic Laboratory
The Bureau of Reclamation used hydraulic models for the first time in 1930 in the laboratory of the Colorado Agriculture Experimental Station in Fort Collins, Colorado. In 1946 the Reclamation...
Structural Engineering in Nuclear Facilities
The papers in this publication cover the general theme of civil and structural engineering as they are applied to nuclear facilities. Traditional topics include seismic analysis, impactive...
Structural Plastics Design Manual
The structural behavior of plastics reflects a number of characteristics different from those of the metal, lumber, and concrete materials familiar to most design engineers. This manual...
High Tech Is More Than a Look
Hollow steel section, also known as tubular steel, is being used for its clean dramatic look, its structural efficiency in compression, the economic efficiency of combining structure and...
Retaining Walls: Competition or Anarchy?
Until the last 10 years, when a retaining wall was needed a cast-in-place concrete gravity or cantilever wall was used. Then along came Reinforced Earth, and this proprietary system began...
Inspecting Buildings During Construction: Are We Doing a Good Enough Job?
Everyone agrees that inspecting buildings during their construction is important�and that it could be done a lot better than in the past. Suggestions for improving inspection practice...
Return to search