A Membrane Structure for a Lunar Assembly Building
This paper describes potential design options and construction approaches for the development of an inflatable membrane structure of non-circular cross section. This structure could be...
Allowable Design Loads for Marman Clamp Systems
Marman clamp separation systems have many aerospace applications. One of their most important applications is in the attachment of spacecraft to expendable launch vehicles. Because their...
Development of a Partial Gravity Lunar Airlock
The Planetary Projects Office (PPO) at the Johnson Space Center is developing design reference missions for human exploration of the Moon and Mars. Missions for both planets require a...
Spacecraft Wall Design for Orbital Debris Impact
This paper describes a method for obtaining the optimal rise angle of corrugated bumpers for the design of space structures in the event of an on-orbit impact. The procedure determines...
Distributional Information for Ejection Fragments
Due to lack of experience of building structures on the lunar surface and the variability that will exist in the loading as well as the structural resistance, it is suggested that initial...
Erectable Truss Hardware for Large Space Structures
The KATLOK connector is a truss structure connector that was designed to be compatible with manual assembly by an astronaut in an extra-vehicular activity (EVA) suit, telerobotic assembly...
Methods to Mitigate Thermally Induced Distortion
The purpose of this paper is to show the magnitude of bending on the Space Station Freedom Navigation Base as induced by thermal expansion and contraction over the operating range -45...
Wheel Space Station for 2025
The advantages and disadvantages of three basic space station designs are discussed. These designs are a zero-gravity can like Skylab, a tethered system, and the wheel. A design of a wheel...
Surface Payload Unloading and Deployment Options for a Lunar Return Mission
While planetary exploration studies have focuses on many areas that are critical to mission success, such as landing space transportation vehicles on other planets, a preferred method...
Lunar Base Aspects for Biotechnology Industry
A lunar base can provide unique services to biotechnology research, development, and production. A lunar location as well as the vacuum environment can protect experiments from contamination...
Onboard Image Processing With Transputers
A transputer based onboard computer for planetary vehicles is being designed in the KFKI Research Institute for Particle and Nuclear Physics (RMKI), Budapest, Hungary. In this paper we...
Development of a High Resolution Spectrometer for Measuring the Near-Earth RFI Environment: The First Auto-Correlator in Space
A detailed description of the near-Earth RFI (radio frequency interference environment in the 0.5 - 16.5 MHz range is required before low frequency arrays can be designed and implemented...
Cables Over the Mississippi
As the designer of the Great River Bridge over the Mississippi between Gulfport, Ill. and Burlington, Iowa, Sverdrup Corp., St. Louis, had to find a way to connect the new five-lane crossing...
A Dome For the 21st Century
Putting a circular dome on a square building--the classical architectural design challenge--takes on new proportions at the Federal Building and Courthouse in Charleston, W. Va. The 170...
Design of Mat Foundation for Egg Shape Digesters
Two levels of ground motion, the Maximum Probable Earthquake and the Maximum Credible Earthquake, were considered in designing the 2.5 million gallon egg shape digesters and their combined...
Concrete Buildings in Regions of High Seismicity
Structural systems for multistory concrete buildings in regions of high seismicity are reviewed. The suitability and certain practical aspects of the systems are discussed. A Uniform Building...
Seismic Design of RC Structural Walls with Unsymmetrical Cross-Sections
An overview of seismic design issues and current experimental research for walls with unsymmetrical cross-sections is presented. The experimental studies include approximately 1/4 and...
Coupling Translation and Rocking Motions
In the design of concrete block foundations for rotating and reciprocating machines, it is important to avoid resonant conditions. Therefore, accurate determination of the frequencies...
Seismic Analysis of Bridges: Simplified or Refined Approach
This paper discusses the differences of seismic responses of bridges among various analysis methods and approaches....
Dynamic Loading of a Rigid Frame Bridge
The objective of this paper is to investigate the dynamic response of a rigid frame bridge to two trucks (side by side) passing over the rough bridge deck. The rigid frame bridge is designed...
Return to search