ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Particle Dynamics and Bed Level Adjustments in a Mountain Stream
The focus of the study was the interaction of coarse bedload sheets with a near-static bed. At a critical discharge bed sediment was transported from upstream sources through the study...

Turbulent Velocities in a Mountain River
A weighted, electronic Pitot tube was deployed in the swift, boulder-bed Waiho river during a 46 m³/s flow and a 214 m³/s...

Hydraulics and Sediment Transport Processes in a Pool-Riffle Rocky Mountain Stream
Sediment transport processes related to varying channel-bed morphology were investigated from April to November, 1993 along a 1 km pool-riffle and step-pool reach of North Saint Vrain...

On Habitat Simulation in Mountain Rivers
Mountain rivers are quite different from other rivers and one of the characteristics that distinguish them from others is the large variation in velocities with time, with location in...

Coarse Sediment Transport and the Maintenance of Fish Habitat in the Upper Colorado River
An analysis of the relation between discharge and boundary shear stress is presented for an alluvial reach of the Colorado River near Grand Junction, CO. The analysis indicates that the...

Palaeohydraulic reconstruction of floods in upland UK bedrock streams: progress, problems and prospects
Palaeoflood evidence from five small upland Pennine catchments in the UK is used with the HEC-2 flow routine to simulate Holocene peak discharges. Even allowing for uncertainty, sensitivity...

Historic-Flood Evaluation and Research Needs in Mountainous Areas
An evaluation of historic flood estimates in mountainous areas in Colorado was made to assess their accuracy. The purpose of this evaluation is to enhance awareness of the need to assess...

Numerical Model Verification on Tidal Current in Tokyo Bay
Results of a research project to verify the Multiple Level Model for a tidal current analysis in Tokyo Bay are presented in this paper. This study is a part of the subject for the Task...

A Physically-Based Model of Channel Widening
The application of many existing models of river channel morphology is limited by their inability to account for bank erosion and changing channel width through time. This paper outlines...

Theoretically-Derived Regime River Width
The governing equations describing the motion of fluid and non-cohesive sediment particles in alluvial channels are combined to analytically determine the equilibrium surface width of...

Boundary Shear in the Vicinity of River Banks
Some experimental data are presented concerning the distribution of boundary shear stresses in trapezoidal open channels for both inbank and overbank flows. The local shear stresses on...

Determination of Geometry and Stress Distribution of an Optimal Stable Channel
A numerical model which determines the geometry of a threshold channel was recently developed (Diplas and Vigilar, 1992). This is important in the design of irrigation canals, channelization...

Equilibrium Geometry of Channels with Cohesive Banks
An optimization model is used to assess the stability of gravel-bed rivers with cohesive channel banks and to determine the effect of the bank stability on the equilibrium hydraulic geometry....

Characterization of Incised Channel Development
A combination of hydraulic and geotechnical techniques have been applied to predict future cross-section morphology in incised channels. The SAM program (Copeland, 1991) computes combinations...

Width Adjustment: Relative Dominance in Unstable Alluvial Streams
The mechanisms that control the relative dominance of width adjustment in unstable streams are described. Specifically, the role of the following factors affecting the fluvial environment...

Field Evaluation of the Sediment Transport Model Stream with a Bank Erosion Component
The graded sediment routing and stream bed evolution model STREAM of Borah, Alonso and Prasad was expanded earlier by incorporating a riverbank erosion component of Osman and Thorne. In...

Expansion and Contraction of Powder River Between Moorhead and Broadus, MT: Geomorphic Observations and Numerical Modeling
Sixteen years of annual surveys demonstrate that the channel of Powder River expands at high flows and contracts at low flows. Channel contraction is associated with the formation of benches...

Macro-Roughness Effects on Stream Reaeration
The gas transfer coefficient is key to modeling dissolved oxygen levels in streams. Engineers commonly predict it as a function of mean flow depth, velocity, and slope. Large errors are...

Luo, Ming
The algebraic stress model of turbulence is employed to calculate the 2-D flow field of the Gongzhui reservoir region. The discharge distribution among the discharging structures is achieved...

Reservoir Sediment Removal: Hydrosuction Dredging
Hydrosuction dredging is a relatively little-known method of removing sediment deposits from reservoirs. The method is similar to traditional hydraulic dredging except the difference between...

 

 

 

 

Return to search