Delamination and Remedial Repair of GFRC Cladding Panels
The construction of a six story, steel framed office structure included an exterior cladding of prefabricated glass fiber reinforced concrete (GFRC) panels. The typical full-size panel...
Software for Optimum Design of Highway Bridge Beams
A software system for analysis and optimum design of welded plate beams subjected to AASHTO highway bridge loads and specifications is described. The system has the capability to design...
Advances in Analysis of Structural Masonry
The papers in this book were presented at the technical session, Advances in Analysis of Structural Masonry, at the ASCE Structures Congress '86 held in New Orleans, LA, on...
Designing for Flow
Geotextiles used for in-plane drainage can carry surprisingly large amounts of water within their structures. These composite drains, known as sheet drains, prefabricated drainage composites...
Application and Performance of Structural Materials and Exterior Facades
The papers in this book present some of the current thinking associated with today's construction materials as well as the results of research which is directed toward the...
Fracture Theory for Nonhomogeneous Brittle Materials with Application to Ice
Brittle heterogeneous materials generally fracture with a dispersed zone of microcracking at the fracture front. The deformation and failure of these materials can be described by a nonlocal...
Mixing Steel and Concrete
For highrise structures, mixed steel-concrete systems are more efficient and cost less than either material alone. The two design approaches are exterior tube structures and core braced...
On the Design of Continuous Composite Beams
Methods of analysis and design of continuous composite beams are presented. Numerical analysis is used to determine the effective width of the slabs to be used in design. The influence...
Behavior and Strength of Stub-Girder Floor Systems
The paper presents a detailed evaluation of the behavior and strength characteristics of the stub-girder floor system. This is a composite girder and beam structure that integrates the...
Strength of Composite Beams under Seismic Loading
Effective width of a concrete slab of a composite beam is specified in various specifications, but their theoretical backgrounds are obscure. Originally, they must have been specified...
Load-Carrying Capacity and Remaining Life of First-Built Composite Girder Bridge in Japan
Kanzaki Bridge, Osaka, Japan, was the first steel-concrete composite bridge built in 1953 to carry the Osaka Prefectural Road over Kanzaki River. The bridge was removed in 1978 after 25...
Composite Bridge Design in Germany
A span length between 40 m and 12 m has been regarded as optimal up to the mid-60's for a composite design to compete with prestressed concrete or steel alternatives. With...
Composite Steel Deck Bridge: An Experimental Study
Composite steel decks with steel fiber reinforced concrete (SFRC) were developed, aiming to improve the durability of the deck pavement and to increase the rigidity of the deck plate in...
Dynamic-Fatigue Response of Continuous Composite Bridges
The dynamic response of continuous composite bridges and the influence of fatigue loading at resonance frequency on the structural response are investigated. It is shown that cracking...
Application of Preflexed Composite Beams to Continuous Bridges
A preflexed beam is a type of concrete encased steel beam of which prestressing has been introduced in the lower flange concrete. Recently, the preflexed composite beams were applied to...
The Eurocodes and Shrinkage in Composite Beams
The two parts of this paper relate to different aspects of design procedures for composite structures of steel and concrete. First, recent developments in the coordination of the eight...
Experimental Investigation of Composite Rigid Frames
According to the series of tests conducted by the authors on composite rigid frame models, the compressive principal stress in the steel web plate at the corner panel was considerably...
A History of Adhesive Bonded Composite Members
The history and development of adhesive bonding in composite members is traced. Two forms of composite members are explained. Research from different parts of the world is compared. Applications...
Mixed Systems: Past Practices, Recent Experience, and Future Direction
A comparison is made between composite column capacities derived from the authors procedure utilizing the ACI (America Concrete Institute) code requirements, and previously published semi-empirical...
Recent Research on Composite Structures for Building and Bridge Applications
Continuing research has been carried out at Lehigh University on composite structural members, joints, and overall systems. This paper summarizes the results of research on four selected...
Return to search