The Simple-Pile Approach to Pile Installation in Clays
This article describes the fundamentals of the approach and presents solutions for the effects of quasi-static deep undrained penetration of a simple solid pile on the deformations and...
Pile Foundation Movements During Construction
Two case histories concern a shipyard wharf and work bay in Los Angeles harbor and an oil refinery expansion in Sumatra, Indonesia. The case histories provide further data on the nature...
A Structural Engineering Perspective for Drilled Shafts
This commentary is an attempt to close the gap between the Building Code Requirements for Reinforced Concrete (ACE 318-83) and the design of drilled shafts. The context of design includes...
Advances in CAD for Structural Engineers
In the 1980's Computer-Aided Design (CAD) will offer the structural engineer an opportunity to improve his work. Decreases in the cost of equipment and improvements in computer-aided...
Advanced Graphical CAD System for 3D Steel Frames
An innovative, advanced graphical computer-aided design system, called STEEL-3D, is described. The main objective of this program is to provide the engineer with all the tools necessary...
Computer Aided Design of Reinforced Concrete
An interactive computer-aided design (CAD) program for the design of reinforced concrete members is herein described. The program, called ECPRS, designs reinforcement and performs all...
Influence of Connection Behavior on Steel Frame Designs at Factored Loads
This paper illustrates how interactive computer graphics, when interfaced with nonlinear inelastic frame analysis programs, can provide a powerful tool for design of semi-rigid frames...
Consulting Engineers' Experience with CAD
A general, brief history of the role of computers in design in consulting engineering practice is presented. Their changing role from their initial early use to today's involvement...
Selfweight Consolidation of Very Soft Clay by Centrifuge
This paper reports a series of selfweight consolidation tests and their analysis by Mikasa's consolidation theory. The tests covered a coastal reclamation project and the...
Yield Behaviour and Consolidation. I: Pore Pressure Response
This paper discusses the frequency of occurrence of anomalous consolidation behaviour. The behaviour of soft clay is discussed briefly in terms of the effective stress path/yield envelope...
Yield Behaviour and Consolidation. II: Strength Gain
In Part I it was shown that in situ yielding of soft foundation clays significantly affected consolidation behaviour and that yield could be defined using the effective stress path/yield...
Instrumentation Performance in Soft Clay Soils (A Case History)
In 1978, IDEAL BASIC INDUSTRIES, INC. initiated construction of a cement manufacturing plant located south of Mobile, Alabama on the Theodore Ship Channel. Because deltaic clays were too...
Sedimentation and Self Weight Consolidation of Dredge Spoil
Test results suggest that self weight consolidation begins when an interface forms in the settlement column and the slurry reaches a critical concentration as a result of the solid particles...
Repairing New York's Historic Bridges
The Brooklyn and Manhattan bridges are just two of New York City's venerable structures that are undergoing rehabilitation. Current work on the Brooklyn involves enlarging...
Dredging Developments in the Canadian Arctic
The use of dredges in the Canadian Arctic in connection with oil exploration programmes has lead to the adaptation of existing and adoption of new techniques. Further development is required...
An Offshore Mound Constructed of Dredged Material
The concept of using dredged material to intentionally construct an underwater mound was tested and confirmed at the Dam Neck Disposal Site, 4 miles offshore Virginia Beach, Virginia....
Hydraulic Uncertainty in Risk Analysis
Considerable effort has been expended in defining and evaluating hydrologic uncertainties; however, the analysis and evaluation of hydraulic uncertainties has received little attention....
Dynamic Reliability Models for Hydraulic Structures
In addition to the determination of capacity and layout of hydraulic structures under normal design, one other important but related task that faces engineers is the evaluation of reliability....
Reliability Analysis as Reflected from the Fourth International Symposium on Stochastic Hydraulics
Reliability analysis is perhaps one of the most practically important branches of the general field of stochastic hydraulics. Its potential applications include quantitative evaluation...
Coping with High and Low Pressures of Transient Flow
Conditions exist in most long distance water pipelines, such that abnormal but inevitable occurrences will cause transient flow. Often the most crucial conditions for consideration by...
Return to search