Modeling the Drying of Dredged Material
The drying of dredged material was modeled mathematically as a diffusive process and the governing equation was solved using an integral method. Closed form solution equations are presented...
Impacts of an Overboard Disposal Operation
The objective of this study was to establish an acceptable dredge disposal site which would be physically and environmentally suitable for periodic use over the 50-year project life of...
Dredged Material Disposal Modeling - Chesapeake Bay
A plan to deepen the approach channels to Baltimore Harbor from 42 feet to 50 feet involves in part the overboard disposal of about 9. 5 million cubic yards of dredged material in the...
Evapoconsolidation in Fine-grained Material
The increased difficulty of obtaining land needed for confined disposal of dredged material and phosphatic clays highlights the need to assess alternative disposal measures by accurately...
Turbidity Generated by a Model Cutterhead Dredge
The study of turbidity generation indicates that, in general, turbidity increases with an increase in the cutter speed and an increase in the cutter swing velocity. A silt curtain deployed...
Computer Models for Dredged Material Disposal Planning
Short term and long term planning for the disposal of dredged material can be significantly enhanced using state-of-the-art computer modeling. Computerized mathematical models can be constructed...
Shoaling Problems and Improvements Sunny Point, North Carolina
The Military Ocean Terminal, Sunny Point (MOTSU), is located on the Cape Fear River, approximately 18 miles downriver from Wilmington, North Carolina. The facility has experienced significant...
The National Dredging Data Management System
The ADDAMS computer program is a collection of user-friendly computer models for planning, designing and managing confined disposal areas. Models which can be used to determine the size...
Dredge Cutterhead Flow Processes
Feasibility studies of new dredge intake and cutterhead shielding techniques were conducted to improve hydraulic cutterhead dredge performance. Simple modification of the suction mouth...
Mixed Layer Modelling of Stratification in Lakes
Mathematical models for vertical heat transfer processes in lakes and reservoirs are grouped into two classes: diffusion models and mixed layer models. In recent years much of the progress...
Modeling of Estuarial Hydrodynamics and Water Quality
The estuary is perhaps the most complex environmental system with which the analyst must deal. Driven largely by tides and hydrologic fluxes, its hydromechanical behavior is further modified...
Flow Parameters of Fluid Mud
A set of small-scale, high-resolution velocity and stress sensors based on rugged metal-clad hot wires and epoxy-encapsulated hot films is to be evaluated for its performance characteristics...
Numerical Model of Mississippi River at Lock and Dam 26
Replacement work was initiated in November 1979. The first stage cofferdam constricted about half of the river channel. As a result, the flow velocity at the constriction increased causing...
Development of Response Plans for Toxic Spills
A plan is proposed for managing the response to a toxic spill into a river system and the minimization of its effects on water utilities, industry and the environment. As technical aids...
Hydraulic Uncertainty in Risk Analysis
Considerable effort has been expended in defining and evaluating hydrologic uncertainties; however, the analysis and evaluation of hydraulic uncertainties has received little attention....
Dynamic Reliability Models for Hydraulic Structures
In addition to the determination of capacity and layout of hydraulic structures under normal design, one other important but related task that faces engineers is the evaluation of reliability....
Reliability Analysis as Reflected from the Fourth International Symposium on Stochastic Hydraulics
Reliability analysis is perhaps one of the most practically important branches of the general field of stochastic hydraulics. Its potential applications include quantitative evaluation...
Numerical Simulation of the Bed Armoring Process
The stability of a river channel depends to a great extent on sediment characteristics. If the amount of sediment coming into a given reach for some reason becomes less than the river's...
Numerical Flood Routing for Natural Channels
A numerical model has been developed for simulating the propagation of a flood wave in a natural channel. Using this numerical model, the influence of the factors affecting the motion...
Upper Hudson River Valley Dam Break Model
In order to determine areas of inundation due to the failure of Conklingville Dam, a dam break analysis was performed, and the resulting outflow hydrograph was routed through the downstream...
Return to search