ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Eigenproperties of a Twisted, Nonuniform Rotating Beam by the Finite Element Method
A initially twisted blade with nonuniform properties along the length, is rotating with constant angular velocity about an axis perpendicular to it's elastic axis. The blade is modeled...

A New NDT Device for Comprehensive Pavement Maintenance (Theoretical Aspects)
A new nondestructive testing (NDT) device is being developed to detect some precursors to pavement distress. The principle of operation of the device is based upon the generation and detection...

Integrity Testing of Concrete Elements Using Surface Waves
The Spectral Analysis of Surface Waves (SASW) method is a nondestructive testing procedure which has been extensively used to determine in situ the elastic moduli of soils and pavements...

Scattering of Waves by Steel Reinforcement in Concrete
The application of wave-sensing methods to the non-destructive evaluation of concrete structures requires often the use of simple (or at least tractable) models for the solution of the...

Flow Dynamics in an End-to-End Vascular Graft Junction
A study consisting of both experimental and numerical methods was performed to determine flow dynamics in the vicinity of an end-to-end anastomosis. The experimentally determined geometries...

Flexural and Shear Studies of Carbon Fiber Reinforced Beams
This paper presents the results of laboratory test on beams reinforced with three dimensional continuous carbon fiber grid. The grid is prefabricated by three-dimensional weaving and epoxy...

Modeling Bond Stress-Slip of Reinforcing Bars Embedded in SIFCON
A brief description is given of the mechanisms associated with the bond shear stress versus slip response of deformed reinforcing bars embedded in slurry infiltrated fiber concrete (SIFCON)....

Determination of Interfacial Shear and Normal Stresses in Fiber Pull-Out
In this paper we present an improved formulation for the pullout problem, wherein both the effects of fiber end condition and interfacial and frictional shear stresses are considered....

Failure Prediction of Anisotropic Material
Basic mathematical elements of a higher order failure theory for anisotropic material are outlined. Surface closure is ensured by requiring a tensor polynomial to satisfy constraint conditions....

Modeling the Chaotic Behavior in Simple Shear Granular Flows
Simple shear granular flows have demonstrated a variety of puzzling phenomena. Both computer simulations and physical experiments have discovered particle grouping, layering and shear...

Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....

The Analysis Related to the Impact of Composite Panels
In analyzing experiments under impact loading, a dynamic model is needed to solve for the deflections and strains as functions of time. For composites, where shear deformation can be very...

The Proposed NASA Lunar-Based Astronomical Observatories
The goals of the Space Exploration Initiative are a manned return to the Moon, a permanent lunar outpost and then a manned expedition to Mars. This presents an opportunity to construct...

SALSA: A Lunar Submillimeter-Wavelength Array
A conceptual design is described for a lunar submillimeter-wavelength interferometer called SALSA, a Synthesis Array for Lunar Submillimeter Astronomy. The intent is to describe SALSA...

Field Verification of a Wave-Induced Current Model
A unique data set of nearshore waves and current measurements over a bar-trough bathymetry was collected during a field experiment at Duck, NC, in October 1990. These high-quality data...

The Transport and Fate of Drilling Muds
The disposal of drilling muds from offshore oil platforms is of concern because of the potential effects of pollution from these muds. Both drilling muds and fine-grained bottom sediments...

3D Hydrodynamic Model Validation Through Simulations of Dynamic Processes
Two test cases with idealized geometry and forcing functions were performed to validate a three dimensional hydrodynamic model for use in coastal waters. The tests involve the barotropic...

Tide and Hurricane Storm Surge Computations for the Western North Atlantic and Gulf of Mexico
The development of a finite element (FE) model to study tides and hurricane storm surge in the Western North Atlantic and Gulf of Mexico is discussed. Issues that are emphasized include...

Estimation of Wind Fields for Coastal Modeling
Wind is an essential driving force for waves, circulation, and storm surge in coastal and estuarine areas. As with other horizontally 2-dimensional models, Corps of Engineers' (CE) numerical...

A Finite Element Model for Three-Dimensional Flows Along the West Coast of Vancouver Island
Extensive salinity and temperature measurements taken during June 1984 are used to calculate a three-dimensional density field for the west coast of Vancouver Island. Combining this field...

 

 

 

 

Return to search