Stability Criteria for Revetments
A simplified 'black box' approach is presented for a number of revetment systems for banks and shore protection. The design criteria, based on the physical similarity...
The Influence of Uniformity on Riprap Stability
Studies have shown that size uniformity influences the stability of riprap. The ratio of fractional sizes of the riprap mixture, D60/D10,...
Design and Construction of Soil-Cement Drop Structures
Soil-cement has been used as an effective and economical slope protection material for embankment dams and stream banks. This paper describes the use of soil-cement in the construction...
Scour in Non-Cohesive Beds at Culvert Outlets
An empirical relationship was developed to estimate the depth of scour in non-cohesive material at culvert outlets. The scour depth is expressed as a function of mean particle size of...
Bed Sediments and Bed Forms of the Lower Mississippi River
Approximately 500 bed material samples were collected from the thalweg of the Lower Mississippi River. At each sample location, a sonic record of the bed was obtained. From the appearance...
Characteristic Deformation of Alternate Bars Due to Low Flow
Experiments on the formation of a small meander-channel at low stage are conducted by supplying a proper discharge on initial bed of alternate bars that have been formed in experimental...
Uncertainty Estimates for Rainfall-Runoff Model
Almost all rainfall-runoff link-node models in use today involve the subdivision of the catchment into smaller areas, linked together by a system of channel links. These 'link-node'...
Bootstrapping Nonlinear Storm Event Models
A bootstrap method for estimating the parameters of nonlinear storm event models is presented. The method pools (combines) the parameter estimates obtained from fitting computed and observed...
Evaluation of the ARS Low Drop Grade Control Structure
The ARS low drop grade control structure was developed by Little and Murphy to provide efficient energy dissipation and effective grade control for streams in northern Mississippi. The...
Mt. Elbert Pumped Storage Trashrack Failure
The failure of three trashrack sections for unit 2 at the suction-draft tube intake occured after one year in service. However, the trashracks for unit 1 had five years of service with...
Guard Gate Tests at Tieton Dam
The emergency gate hoist system on the guard gates at Tieton Dam, near Yakima, Washington, was tested as part of the United States Bureau of Reclamation Safety Evaluation of Existing Dams...
Characteristics of the Flood Release-Induced Vibrations with Qianshui Thin-Arch Dam
In this article the prototype observations and design analyses are described regarding the flood release-induced vibrations of the Qianshui thin-arch dam and its foundation; and their...
Paleoflood Hydrology and Design Decision for High-Risk Projects
Paleoflood hydrology is not merely one of several alternative methods for risk-based design. Rather, certain kinds of accurate data on the largest paleofloods of recent millennia provide...
The Effect of Aeration on Scour
A vertical water jet was used to study the effects of entrained air, tailwater depth, size of bed material, jet diameter, and jet velocity on scour. Small amounts of entrained air were...
Hermite-Galerkin Model for Dam-Break Floods
A model based on the finite element method using cubic Hermite basis functions and Galerkin weighting was formulated to solve the partial differential equations that govern unsteady one-dimensional...
Development of a Computer Aided Decision Process for Channel Rehabilitation and Watershed Enhancement Techniques
To assist the engineer in planning and design of channel stabilization measures, an expert system (CADWET) was developed using a commercially available expert system shell program. The...
Use of Linear Programming for Hydraulics Problems
Water is becoming a more and more precious commodity worldwide with each passing day. At the same time, the optimum and most productive solutions to water control and utilization are becoming...
Pump Selection Program and a Better User Interface
Numerous highly innovative computer solutions to engineering problems are of little use to the practicing engineer because these programs are not supported by adequate user interface....
Compact Pump Sump Design
This paper details the design criteria chosen to construct a pump sump within several on-site constrictions. The physical size restrictions of the site necessitated the construction of...
The Equivalence of Path and Node Methods for Water Distribution Network Analysis
This paper deals with the equivalence between commonly employed methods, path and node adjustment methods, for analyzing water distribution networks. The basic equations for steady-state...
Return to search