Evapoconsolidation in Fine-grained Material
The increased difficulty of obtaining land needed for confined disposal of dredged material and phosphatic clays highlights the need to assess alternative disposal measures by accurately...
Turbidity Generated by a Model Cutterhead Dredge
The study of turbidity generation indicates that, in general, turbidity increases with an increase in the cutter speed and an increase in the cutter swing velocity. A silt curtain deployed...
Computer Models for Dredged Material Disposal Planning
Short term and long term planning for the disposal of dredged material can be significantly enhanced using state-of-the-art computer modeling. Computerized mathematical models can be constructed...
The National Dredging Data Management System
The ADDAMS computer program is a collection of user-friendly computer models for planning, designing and managing confined disposal areas. Models which can be used to determine the size...
Linear Programs for Dredging Management Decisions
Recurrent economic concerns facing decision makers in the dredging industry are considered. Problems related to contract bidding, project planning and resource utilization are formulated...
Sediment Resuspension from Dredging Activities
Dredges are a logical choice for removing contaminated sediments from our Nation's waterways. Historically, the dredging industry has emphasized increased production in an...
Influence of Roughness on Velocity and Dispersion at Low Flow
Dependence of the hydraulic and transport characteristics of low flow on channel roughness is investigated. Empirical expressions are used to estimate roughness coefficient as a function...
Buoyant Jet Solution with Synthetic Entrainment Function
A synthetic entrainment function is proposed for buoyant jets discharged at an arbitrary angle into otherwise quiescent ambient fluids. The entrainment function consists of two separate...
Flow Parameters of Fluid Mud
A set of small-scale, high-resolution velocity and stress sensors based on rugged metal-clad hot wires and epoxy-encapsulated hot films is to be evaluated for its performance characteristics...
Numerical Model of Mississippi River at Lock and Dam 26
Replacement work was initiated in November 1979. The first stage cofferdam constricted about half of the river channel. As a result, the flow velocity at the constriction increased causing...
Dynamic Reliability Models for Hydraulic Structures
In addition to the determination of capacity and layout of hydraulic structures under normal design, one other important but related task that faces engineers is the evaluation of reliability....
Upper Hudson River Valley Dam Break Model
In order to determine areas of inundation due to the failure of Conklingville Dam, a dam break analysis was performed, and the resulting outflow hydrograph was routed through the downstream...
Mechanics of Mudflows
A Bingham model is adopted to study the fluid mechanics of mudflows. Equations for predicting the transition from laminar to turbulent flow in an open channel are formulated and verified...
Boundary Element Analysis of Flow in Heterogenous Porous Media
The boundary integral equation method (BIEM) is an efficient numerical method which has been applied to a wide variety of engineering problems governed by a partial differential equation...
Higher-Order Methods for Transient Free-Surface Flows
One-dimensional transient free-surface flows in open channels are described by a set of quasi-linear hyperbolic partial differential equations, called the Saint-Venant equations. Numerical...
Numerical Modeling of Flow in Hydropower Intakes
To reduce high mortality of downstream migrating juvenile salmon at hydraulic turbines, traveling screens are used to guide the juveniles into a bypass channel for safe passage. However,...
Hydraulic Analysis of Water Transmission Flowing Party Full
The hydraulic behavior of a transmission line that flows full along only part of its length is more difficult to analyze than a completely full line. Unsteady open-channel and closed-conduit...
Stability of Method of Characteristics
For the analysis of waterhammer, the first-order accurate method of characteristics (MOC) has been widely used for which Courant condition for stability has been developed neglecting the...
Computer Aided Hydraulic Design of Pipelines
General purpose computer software packages are being used more frequently in the hydraulic design of pipeline systems. The areas where the use of such packages are advantageous over earlier...
Numerical Modeling of Downstream Impacts Resulting from Hydropower Operations
Hydropower peaking operations often have downstream impacts that require an accurate assessment. A one-dimensional implicit finite difference numerical model has been used to accurately...
Return to search