Diffusion Models of Crack Growth Due to Random Overloads
Stochastic diffusion models of crack growth are developed, reflecting uncertainty in applied loading and residual stresses near the crack tip. Applications are shown to (1) random vibration...
Dilatometers Settle In
The benefits of the dilatometer test DMT are described. This geotechnical in situ testing tool was developed and patented by an Italian professor and engineer named Silvano Marchetti....
Monitoring the Effects of the Pipe Insertion Machine Technique
The results of an experimental study of the pipe insertion machine are presented in this paper. Strains induced in an adjacent pipeline, soil displacement, pipe deflection and vibrations...
Stable Channels with Loose Boundary
Recently, G. Parker suggested that the lateral transport of downstream momentum due to Reynolds stresses should be included in the momentum balance used to calculate the boundary shear...
Water and Sediment Yield in the Tucannon River
A site specific model for water and sediment yield was developed to estimate water quality aspects of the Tucannon River Basin. In this paper, the relation of water and sediment yield...
Prediction of Scour Depth Under Armoring Conditions
A simple procedure is proposed to compute scour depth on an alluvial bed having graded materials under flow conditions which produce armor layer at the bed surface. The procedure is based...
Response of Advanced Composite Space Materials to Thermal Cycling
In addition to microgravity and lack of atmosphere, the space environment provides intense radiation of both penetrating and nonpenetrating types. This paper focuses on the cyclic radiational...
Albemarle-Pamlico Sounds: Issues, Resources, and Management (
The Albemarle-Pamlico Sound complex, located in northeastern North Carolina, is the third largest estuarine complex in North America and the second largest in area in the United States....
Reclamation of Athabasca Oil Sand Sludge
The bulk of oil sand tailings (80 to 90%) consists of quartz sand, which is defined to be everything coarser than 44 microns. The other 10 to 20%, termed 'sludge',...
Analysis of Plastic Soil in Contact with Cavitose Bedrock
A numerical analysis has been conducted to evaluate the stress deformational response of highly plastic soils in contact with cavitose Bedrock. The numerical idealization represents the...
Hydraulic Structures on Piles
Many hydraulic structures built in the early 1900's were founded on piles. Today, when these structures are analyzed as 'pile-supported', the analyses...
Consolidation of Slurried Soils
This paper describes the use of large strain consolidation theory and centrifugal modelling to study the consolidation behavior of slurries. Laboratory testing of the slurry is needed...
Techniques for Measuring Flow and Sediment Parameters Near the Bed in Estuaries
The collection of accurate and meaningful field data is often the key to successful description and prediction of natural processes. The U. S. Army Engineer Waterways Experiment Station...
Nonhomogeneous Terms in the Unsteady Flow Equations: Modeling Aspects
A study is in progress to identify the relative significance, effects, and benefits attributable to the use of one-dimensional, unsteady, open-channel, flow-simulation models employing...
Mechanics of Embankment Erosion During Overflow
Thousands of dams built in the United States have a potential to be overtopped by flood flows. It is necessary to understand the mechanics of embankment erosion in order to evaluate the...
Vegetal Protection of Embankments and Spillways
Recent advances in the application of tractive stress to the design of grass-lined open channels are used to develop a tentative procedure for analyzing the hydraulic performance of vegetated...
Refined Modeling to Estimate Sediment Discharge
Numerical solution of the two-dimensional turbulent flow over a train of identical dunes is obtained with the Algebraic Stress Model for closure. The effective tractive force acting on...
Meixner Functions Model Crop Yield vs. Applied Water
Most crop production functions are reported as linear functions even though everyone knows they are not. The few examples of non linear crop production functions that exist in the literature...
Accuracy and Geographic Transferability of Crop Water Production Functions
This paper presents the results of that recent study, which investigated over 300 crop water production functions (CWPFs) and 370 publications on production functions. The accuracy and...
Prediction of Deformations Due to Heat Curving
This paper summarizes the state of the art in the thermal deformation techniques. Alternate analytical methods are described. The limitations and accuracy of these models are noted, and...
Return to search