Composite Materials Show Promise for Clean Kaplan Runners
In order to prevent any possibility of oil leakage into river water, LMZ manufactured Kaplan runners containing oil in the blade servomotor only, while the blade operating mechanism operates...

Hydro Plant Modernization and Uprating
The paper suggests that the method to achieve desirable hydropower benefits at costs lower than for new thermal projects, is through systematic modernization and upgrading of older hydro...

Thermal Regimes at Tailwaters of Hydroelectric Dam
Continuous temperature data were collected in the field for periods of approximately two weeks in Center Hill Tailwater. These data were analyzed to determine the warming rates and travel...

Effect of Nile River Flow on Performance of Shoubrah Power Plant Cooling System
Shoubrah El-Khimah Power Plant was built in 1982. Its peak capacity is 1200 MW, generated by four units, three of them having one cooling water intake. The cooling water pumps suffer from...

Redondo Beach Thermal Study
Thermal tests were conducted in a 3D physical model of Redondo Beach King Harbor to simulate power plant cooling water intake and discharge into the harbor. Tests were conducted to determine...

Environmental and Hydraulic Considerations in the Design of a Circulating Water Cooling System
Environmental considerations play an important part in the design of a condenser cooling system. A once-through system may require assessment of a combination of events to determine the...

Design of a Stratified Cooling Channel
Cooling ponds are used for managing waste heat discharges. Cooling ponds are, however, expensive to construct and operate. A cooling channel is studied as an alternative means of managing...

Comparison of a Vibrational Gage and a Plummet for Continuously Measuring Fluvial-Sediment Concentrations
Obtaining sediment records for small, remote streams is difficult not only because of the logistical problems, but also because of the rapid changes in concentration that accompany the...

A Knowledge Based System for Design of Localized Mechanical Mixing Systems
Knowledge-based systems, frequently referred to as expert systems, have been used in a variety of computer-based design applications. They are particularly suited to design processes where...

Air-Water Transfer: The Role of Partitioning
A review is presented of the role of air-water equilibrium in determining the direction and rate of transfer of chemicals between water bodies and the atmosphere. Because this diffusive...

Effect of Temperature on Gas Transfer at Low Surface Renewal Rates
In order to investigate the dependence of gas transfer coefficients on temperature under conditions of low surface renewal rates, laboratory experiments were conducted using simultaneous...

Oceanic CO2 Uptake and Future Atmospheric CO2 Concentrations
The global pattern of water column inventories of bomb-produced 14C suggests that an upwelling of bomb 14C-free...

Steady Turbulent Gas Desorption in Surface Condenser Tubes
A one-dimensional steady two-phase separated flow model in conjunction with the energy and mass transfer equations and an associated turbulent mass transfer coefficient model are utilized...

Quake-Safe Housing, Again
Because so little data exist about earthquake behavior of buildings that have been strengthened to meet seismic codes, many engineers are curious about the Hotel Oakland in California...

Seismic Design for Port of Los Angeles, 2020 Program
Due to the Port of Los Angeles' (POLA) importance as a regional hub for transportation and commerce and the potential for a major seismic event in the Southern California...

Bridge Seismic Retrofit Prioritization
This paper describes a mathematical model developed to produce an index by which bridges in a network can be prioritized systematically for seismic retrofitting. The model incorporates...

Scenario for Improving the Seismic Resistance of Pipelines in the Central United States
A number of pipelines transporting crude oil and natural gas to the Midwest and Northeast pass within and adjacent to the New Madrid seismic zone in the central United States. A major...

Seismic Hazard Along a Crude Oil Pipeline in the Event of an 1811-1812 Type New Madrid Earthquake
This paper presents an assessment of the seismic hazard that exists along a major crude oil pipeline (pipeline 22). An 1811-1812 type New Madrid earthquake with moment magnitude 8.2 is...

First Experience Concerning the Seismic Behaviour of an Electric Power System in Eastern North America
The November 25, 1988, Saguenay earthquake of magnitude MbLg=6.5 occurred in the province of Quebec, Canada....

Two Decades of Communications Systems Seismic Protection Improvements
Telecommunications systems in North America have gone through significant technology changes in the past twenty years. The electro-mechanical switching equipment has been replaced by electronic...

 

 

 

 

Return to search