Investigation of the Long-Term Creep Modulus for Buried Polyethylene Pipes Subjected to Constant Deflection
The tests reported in this paper are simulating the stress relaxation in constantly deflected pipe rings of various high density and medium density polyethylene grades. The pipe rings...
The Relative Strain as a Design Criterion for Buried uPVC Gravity Sewer Pipes
When designing buried plastic sewer pipes, the relative strain caused by deflection of the circular pipe section is of particular interest. The reason for increased interest is the present...
Buried Fiberglass Pipe Response to Field Installation Methods
In 1970 near Yuma, Arizona, a field test installation of 30 inch diameter fiberglass pipe was constructed. Twelve years later the pipeline was remeasured. Measurements of pipe profile,...
A Study of Inlet Control Alternatives for SWM
A laboratory study of alternatives for effecting inlet control on urban storm sewer systems for stormwater management (SWM) is described. The test facility was a full-size physical model...
Stress and Strain Responses of a Soil-Pipe System to Vehicular Traffic
A 16-in. natural gas pipeline near Racine, Wisconsin, had been in service for some 30 years. In 1982 road widening operations on a line parallel with the pipe presented the opportunity...
Durability of Clay Pipe
Clay pipe, manufactured in accordance with ASTM C-700, has unusual resistance to attack by chemical agents. The pipe is highly stable in hydrochloric and sulfuric acid and subject to corrosive...
Inspection/Condition Analyses of Large Underground Pipelines
Inspection/Condition Analyses of Underground Pipelines (sewers and conduits) will be a necessary function of the pipeline Owner/Operator. The Condition Analyses and Inspection phases are...
Field Testing of 84-Inch-Diameter Plastic Pipe
During the summer of 1981, a research project was initiated to monitor strains and deformation in 84-inch diameter RPM (reinforced plastic mortar) pressure pipe. Three 20-foot (6. 1-m)...
Influence of Frost Action on the Load Exerted on Buried Pipe
When work was started on revising the Swedish code for concrete pipes at the end of the 70's, a research project was carried out to evaluate the risk of increased load due...
Reliability Evaluation of Water Distribution System Components
Reliability engineering concepts are substantially developed and have been routinely and successfully applied to the evaluation of electrical and mechanical components. However, these...
Evaluation of Water Distribution Network Reliability
This paper briefly describes six techniques developed for evaluating reliability of systems with complex configuration. Also, a brief comment about the computational aspects and applicability...
Frazil Ice Control Using Air Guns
The design of the J. H. Campbell, Unit 3, Cooling Water Intake in the late 1970's used some new ideas and concepts in response to a strong concern for fish protection at a...
SCADA and Network Analysis
Connecticut Natural Gas Corporation (CNG) is a gas distribution utility serving 130,000 customers in Connecticut. Gas purchase costs and pipeline maintenance costs account for 65% of CNG's...
Computer-Assisted Problem Solving in Hydraulic Engineering
A number of practical hydraulic problems may be solved using software that allows interaction at the equation level rather than through higher level languages. This paper presents examples....
Microcomputers in Hydraulics-Hydrology Education
Microcomputer software is utilized for pipe network analysis, unsteady flow in pipelines, watershed modeling, flood studies, reservoir operations, dam break analysis, and groundwater systems...
Centrifugal Abrasion-Resistant Pumps in Intermediate Length Pipeline Systems
The success of long-distance slurry pipelines is in many cases dependent on careful preparation of the solids prior to transport. Positive displacement pumps are employed. However, for...
Transients in Empty Pipes Subject to Rapid Filling
A mathematical model was developed to simulate the pipe filling process and the pipe forces based on incompressible water column theory. The method easily accomodates appropriate boundary...
Quick Stroking: A Fast and Accurate Algorithm for Time-Optimal Valve Closure Synthesis
In this paper, a fast, simple, yet effective technique for valve motion synthesis is developed. This technique called Quick Stroking is applied to a practical example problem, and it may...
Girth Weld Defect Tolerance Criteria
This paper describes the following criteria proposed for setting allowable defect sizes in girth welds: PD 6493:1980, 'Guidance on Some Methods for the Derivation of Acceptance...
Solutions in the Pipeline
Water and sewer agencies across the country are beginning to feel more comfortable about pipeline rehabilitation. Where once replacement was the ony alternative considered for aged, clogged...
Return to search