Load Sharing Benefits of Composite Pile Systems
The paper develops design techniques which will allow piled systems to be extended into more onerous operating conditions. In storm events marinas always develop failure mechanisms at...
The Application of a Structural Analysis Program to Floating Dock and Guide Pile Design
The floating dock systems and guide piles used in marinas are often designed using over simplified analysis techniques. However, if the dock system is flexible or if either the soil conditions...
Frictional Base Isolation Using a Layered Soil-Synthetic Liner System
The application of smooth geotextile liner materials to seismic base isolation of shallow foundations has been evaluated using laboratory testing and numerical analysis. Laboratory testing...
Pile Test for Earthquake Repair
Load testing for existing concrete piles was specified as part of a seismic retrofit at the Port of Oakland after the Loma Prieta event. The Port wished to use heavier cranes at cargo...
Dam Foundation Grouting
Response Surface Fitting in Offshore Structural Design
Failure probability estimation of complex offshore structures requires the modeling of the system behavior in terms of all uncertain parameters. This paper investigates the applicability...
Stochastic Behavior of Concrete Arch Dam-Reservoir Fluid-Foundation Systems in Nonstationary Random Vibration
The behavior of elastic arch dam reservoir fluid system subjected to ground acceleration excitations has been studied extensively by Chopra and his colleagues. In their studies, the excitations...
Bayesian Updating of Axial Capacity of Single Pile
The paper outlines a Bayesian technique to update predictions of pile driving and axial pile capacity on the basis of pile driving records. The approach enables one to systematically account...
Probabilistic Evaluation of the Performance of Axially Loaded Bored Piles
Probabilistic evaluation of single slender elastic elements, bored piles, in a multi-layered soil system without noticeable displacement of the soils are considered. The numerical analyses...
Reliability-Based Design Requirements for Foundations of Buildings Subjected to Earthquake
Optimum seismic design coefficients and safety factors with respect to shear and overturning failure modes are obtained for a set of multi-story frame buildings idealized as single-mass...
Reliability-Based Analysis of Shallow Foundations
The effects of different parameters on the reliability of shallow foundations are examined. It is found that the footing depth, the footing length, and the load ratio have almost no effect...
One Power Plant, Two Job Sites
In response to the lingering questions about energy, officials from Vidalia, La initiated a plan in 1977 to build a hydroelectric plant at a site 90 mi northwest of Baton Rouge, where...
Seam Examination
Charron discusses the importance of seam sampling in geomenbrane installation. In 1988, about 30 million mi of polyethylene geomembranes were used to line landfills, liquid impoundments,...
Restoration of a Buttress Dam
Inspections of Morris Shepard Dam on the Brazos River in Texas revealed serious defects in the dam and its foundation. Piezometric pressures below the spillway buttresses greatly exceeded...
Morris Sheppard Dam: A Rational Approach to Stability Analysis
This paper details the excessive foundation piezometric conditions found during a routine five-year inspection, and presents the results of backfigured stability analysis of a critical...
A Knowledge-Based Approach to the Design of Highway Bridge Foundations
This paper discusses the development of a prototype expert system using a commercially available expert system shell. The system is to be used for the selection of highway bridge foundations....
Design of Steel Transmission Pole Structures
Characteristics of the Flood Release-Induced Vibrations with Qianshui Thin-Arch Dam
In this article the prototype observations and design analyses are described regarding the flood release-induced vibrations of the Qianshui thin-arch dam and its foundation; and their...
Decayed Timber Bridge Microcomputer Rating Program
National Bridge Inspection Standards (NBIS) require that capacity ratings for each bridge structure be established. This requirement includes timber bridges which are often decayed, have...
Field Installation of Strain Gaged Geotextiles
High-strength polyester geotextiles were used in two major Corps of Engineers projects: Wilmington Harbor, Del. and New Bedford, Mass. To verify design assumptions and as part of monitoring...
Return to search