Multi-Reservoir Systems Optimization by the Aggregation/Decomposition Methodology
Studies on long term optimization of multi-reservoir systems are enhanced by the availability of closed-loop policies as available in Stochastic Dynamic Programming (SDP). SDP offers a...
Monitoring Petroleum Contamination in an Aquifer
An experimental study of the behavior of petroleum in an aquifer with static and changing water depths were studied. The experimental apparatus consisted of plexiglass tanks filled with...
Modeling 3-D Ground Water Mounding
Groundwater mounding is caused by localized recharge to the saturated zone in an unconfined aquifer. Estimation of groundwater mounding shape and height is important to provide an estimate...
Development of Transport Model for Groundwater Planning and Management in Taipei Basin
The objective of this paper is to develop a groundwater model for contaminant transport simulation. The transport model, in conjunction with the previously developed flow model, is used...
Modeling of Maximum Velocity in Open-Channel Flow
A great deal of information about an open channel flow is contained in the maximum velocity, which, along with the entropy parameter, can determine the mean velocity. Therefore, the maximum...
Using the Weir Back as an Energy Dissipator
The effect of weir back in energy dissipation is investigated experimentally and theoretically. The study includes four different shapes of weir back. The boundary friction force and the...
High-Resolution Upwind Schemes for Solving Mass Transport Equation
A fractional-step algorithm is employed to solve the mass transport equation by decomposing the advection-dispersion equation into two portions, pure advection and pure dispersion. High-resolution...
Numerical Simulation of One Dimensional Transcritical Flow
The term transcritical flow describes the existence of both subcritical and supercritical flow simultaneously within the computational domain. Transcritical flow situations are encountered...
Depth-Averaged Flow Model in Curvilinear Coordinates
Implementation of a depth-averaged model in orthogonal curvilinear coordinates permits to resolve questions about grid refinement, the representation of complicated boundaries, and the...
Treatment of Nonhomogeneous Terms in Flow Models
A study of the relative significance and treatment of nonhomogeneous terms in unsteady open-channel flow simulation models has been conducted. The effects of nonhomogeneous terms including...
Use of a Modified Hybrid Model to Analyze the Effectiveness of Jetties in Reducing Marina Sedimentation
The effectiveness of the construction of jetties near the entrance channel of a coastal marina in reducing marina sedimentation has been analyzed using a modified hybrid model. The modified...
Energy Dissipation for a RCC Stepped Spillway
A two-dimensional physical model study was used to quantify the kinetic energy dissipation of the steps in a roller compacted concrete (RCC) stepped spillway. The steps were effective...
Force and Pressure Measurements in Spillway Plunge Pools
Plunge pools are often used to dissipate energy from high head spillways with flip bucket terminal structures. Conventional design of plunge pools has been based on a program of mobile...
Use of FESWMS-2DH for the Attaway Road Bridge Repair Project
The paper presents the application of the Finite Element Surface Modeling System: Two Dimensional Flow in a Horizontal Plane (FESEMS-2DH) computer program in the Attaway road bridge repair...
A Wind Driven Lake Circulation Finite Element Model for the Upper St. Marys River
The hydrodynamics of the Upper St. Marys River is simulated by a three dimensional steady state finite element model. The rigid lid and hydrostatic pressure assumptions are used in the...
Problems with Indirect Determinations of Peak Streamflows in Steep, Desert Stream Channels
Many peak streamflow values used in flood analyses for desert areas are derived using the Manning equation. Data used in the equation are collected after the flow has subsided, and peak...
Boundary Conditions and Flow Patterns in a Mountain River
Flood flow patterns in mountain valleys may be influenced by longitudinal variations in channel and valley morphology and by temporal variations in boundary conditions. This study utilizes...
3D model verification for a groyne and harbor experiment
A discussion of 3D model verification and calibration based on measurements in a flume is carried out for different test cases (groyne, harbor). The measurement data is available for public...
Sediment Transport in Sewers and Design Implications
Extended studies on sediment transport in sewers were conducted at the University of Newcastle upon Tyne and using this new as well as previously available data an attempt has been made...
Problems of Stream Flood Simulation and Prediction
The article presents a report on the natural flooding in a stream and the problems encountered when simulating and predicting stream floods. The complexity of flood characteristics, the...
Return to search