The Effect of Multiple Compliant Layers at the Fiber-Matrix Interface on Residual Thermal Stresses in Metal Matrix Composites
The large mismatch in thermoelastic properties of the fiber and matrix phases in advanced metal matrix composites, coupled with high consolidation temperatures, produces severe residual...
Thermal Investigation of a Large Lunar Telescope
Recent interest in construction of a large telescope on the Lunar surface (Nein and Davis, 1991; Bely, Burrows, and Illingworth, 1989) has prompted this feasibility study of a thermal...
In Situ Recovery of Water from Dormant Comet Cores & CI Carbonaceous Chondrites
Water and volatiles may be produced by drill holes into dormant comet cores or class CI or CM asteroids. This is modeled after in-situ mining as in the Frasch process sulfur mines of the...
The Transport and Fate of Drilling Muds
The disposal of drilling muds from offshore oil platforms is of concern because of the potential effects of pollution from these muds. Both drilling muds and fine-grained bottom sediments...
Modeling 3-D Circulation Using the DSS Technique
The direct stress solution (DSS) technique allows a numerical internal mode solution for the vertical variation of shear stress, rather than velocity, in a three-dimensional circulation...
Implementing Uncertainty Treatment in AI Development Environment
The seismic vulnerability of existing masonry buildings is investigated by an expert system prototype. Field inspectors have to provide answers which can be of a Boolean, fuzzy or probabilistic...
Structural Reliability of Seismic Isolation System
Seismic reliability analysis of isolated structure is conducted. In this study focused on are bearing capacity of isolation layer considering strength randomness of isolation bearings...
Serviceability Analysis of Wood Beams with Creep
The effect of creep deformations on the serviceability reliability of single, dimension lumber wood beams is examined. A viscoelastic stress-strain relationship is used to model the time-dependent...
Stochastic Finite & Boundary Element Simulations
Stochastic constitutive properties are important in real-world design-analyses. Therein the spatially varying random coefficients in field equations necessitate rather unconventional computational...
Spatial Variability Effects on the Seismic Response of Models of Bridges
The significance of the spatial variability (spatial incoherence and apparent propagation) of the seismic ground motions on the response of bridges, modeled as three-span symmetric beams,...
Vibration Control of Highway Bridge Under Earthquakes
Seismic base isolation for highway bridges may increase relative displacement, while reducing the acceleration and base force. Elastomeric bearings with lead plug for base isolation may...
Surface Motion Due to Stochastic Plane Sources in a Layered Medium
To simulate the ground motion in the near field, a seismic fault is modeled as a two-strip plane. The width of each strip is so thin that the rupture process of the strip can be described...
Probabilistic Characteristics of a Sliding Structure Via New Stochastic Linearization Methods
New, non-classical stochastic linearization techniques are applied to solve the titled problem. Two alternative criteria, suggested by X. Zhang and I. Elishakoff, respectively, are evaluated....
Stochastic Modelling of Strong Ground Motions for the Istanbul, Turkey Area from Seismic Data for the Surrounding Region
The ultimate goal of this research is to obtain simulations of earthquake ground motions for the Istanbul, Turkey region. A process of earthquake analysis developed by Ellis and Cakmak...
F-K Spectra From a Haskell-Type Source in a Multiple-Layered Half-Space
Analytic expressions for the complex Fourier amplitudes of seismic ground motion at the free surface of a layered half-space are established. The seismic source is described using Haskell's...
Probabilistic Evaluation of Bearing Capacity of Shallow Foundations
A probabilistic model is developed to evaluate the bearing capacity of shallow foundations. The bearing capacity formulation proposed by Terzaghi is used but with the bearing capacity...
Evaluation of Seismic Soil Response Using Stochastic Linearization
This paper discusses the use of stochastic linearization to non-degrading soils. First, the Bouc-Wen model parameters are reviewed. Monte Carlo simulation results are compared with the...
Seismic Response Variability of Soil Sites
The seismic response variability of soil sites due to randomness associated with both the input base motion and spatial inhomogeneity of the shear modulus is investigated. Some numerical...
Exact Nonstationary Response of a Sliding Rigid Structure to a Modulated White Noise Base Excitation
The seismic design of embankment dams, earth retaining walls and base isolation systems have emphasized the dynamic analysis of a rigid block sliding on a moving base. In an early study...
Fatigue Life Variability and Reliability Analysis of a Wind Turbine Blade
Wind turbines must withstand harsh environments that induce many stress cycles into their components. A numerical analysis package is used to illustrate the sobering variability in predicted...
Return to search