An Improved Method for Measuring System Performance of Hydraulic Infrastructure Systems
Due to the public awareness of the importance of functioning of hydraulic infrastructure systems and the serious consequences caused by their failure, many researches were undertaken to...
Measurement of Bridge Scour at the SR-32 Crossing of the Sacramento River at Hamilton City, California, 1987-92
A study of the State Route 32 crossing of the Sacramento River near Hamilton City, California, is being made to determine those channel and bridge factors that contribute to scour at the...
Estimating Bridge Scour in New York from Historical U.S. Geological Survey Streamflow Measurements
Historical streamflow measurements by the U.S. Geological Survey an bridge-inspection reports by the New York State Department of Transportation are being used to estimate scour at 31...
Integrated Planning Analysis for an Aggregate Mine
Planning and design work of an aggregate mining facility within the Sutter Bypass, a key component of California's flood control system, is being performed by multidisciplinary team of...
Bank Stabilization with Environmental Features on the Middle Rio Grande
River maintenance on the middle Rio Grande has changed significantly since channel work began in the mid 1950's. Past practices included pilot or relocation channels, vegetation control,...
Microtunneling: Overview and Case Study
Microtunneling is defined in the United States as a remotely controlled, laser guided pipe jacking process, which does not require personnel entry. This paper describes the components...
Depth of Cover Surveys for Waterway Crossings
The majority of pipelines cross at least one waterway of some type, especially the interstate lines which from start to end cross numerous bayous, canals and major rivers. These waterways...
Recent Developments in Safety Research from the Gas Research Institute
Recent developments in Safety Research, as supported by the Gas Research Institute (GRI), have consisted primarily of hardware-oriented applications to various gas industry safety operations....
Transportation Management Systems?The Key to Efficiency
Federal, State, and local governments are under increasing pressure to balance their budgets and cut costs while at the same time respond to public demands for quality services. The current...
Identifying Transportation Control Measures: a Straighforward Approach to Identifying Transportation Control Measures to Address Concerns with Air Quality
The 1990 Clean Air Act Amendments (CAAA) exemplify society's increasing environmental concern. Regions not attaining the CAAA requirements must develop methods to reduce the pollution....
Trip Rates Adjustments for Impact Assessment and Congestion Management
Evidence that all urban trips are not equal and that trip rates need to be adjusted to reflect the differential contribution of trips to traffic loads and congestion is presented. Adjustments...
Gyratory Testing Machine Usage in Monitoring HMA Quality
This paper describes research conducted by the Mississippi Department of Transportation to investigate the potential of the U.S. Army Corps of Engineers' Gyratory Testing Machine (GTM)...
Influence of Lateral Wind on Driving on Offshore Bridge
The Honshu-Shikoku Bridges are a system of highways crossing over the sea, where cross-winds variously affect vehicle behaviour. This is the intermediate report on the surveys aimed at...
Traffic Accident Analysis System
While statistical data on traffic accidents are invaluable in devising effective traffic safety measures, the number of data items and samples are vast and they must be processed and edited...
Taking the Pain out of the Punch List
Lengthy punch lists mean trouble for everyone involved, from the owner to the designer to the contractor, but the punch list doesn't have to be long and it doesn't...
The Proof is in the Pavement
A technique known as statistical quality assurance (SQA) lets DOTs quantify pavement quality by setting statistical guidelines for the work they will accept. SQA is a distinct departure...
Simulation of Large PRT Systems for Swedish Cities
Simulation models have been developed in Sweden to analyze large PRT networks. A new control concept is introduced called `point-synchronous control'. It is a practical way of realizing...
APM Microprocessor Based Enhancements
Many recent product enhancements have helped to move automated people mover (APM) technology toward the 21st Century with far reaching prospects for applications in the mass transit industry....
Advances in People Mover Central Control
AEG Westinghouse Transportation Systems, Inc. has designed many graphic display based central control computers for people mover systems. These include airport systems for: Changi in Singapore,...
Quality Control: Bridge Steel Fabrication and Erection
This paper examines the Quality Control Program Plan (QCPP) developed by Frederic R. Harris, Inc. (FRH) for fabrication and erection inspection of over 5,448,000 kg of AASHTO Fracture...
Return to search