Toward User-Oriented Failure Management Strategies for the Morgantown People Mover
The Morgantown People Mover (MPM) is the most sophisticated automated people movers in the United States. It is the only one that offers 'personalized' service...
The Effect of Connection Flexibility on Steel Members and Frame Stability
With the advent of Load and Resistance Factor Design (LRFD) and the many existing moment-rotation curves for connections, the use of actual connection flexibility in the design process...
Utilization of Experimentally Obtained Connection Data in Assessing the Performance of Steel Frames
Data from over 70 separate experimental studies on steel beam to column connections are reviewed with particular reference to the joint's in-plane moment-rotation characteristic. More...
Buckling of Flexibly-Joined Simple Frames
A nonlinear analysis of plane elastic frames is presented. The static loading consists of both eccentric concentrated loads (near the joints) and uniformly distributed loads on all or...
Behaviour and Strength of Steel Frames with Semi-Rigid Connections
A research study was started at the Politecnico of Milan (Italy) to investigate the influence of the main governing parameters on the behaviour and strength of flexible frames. A sophisticated...
Joint Flexibility in Steel Frames
This paper investigates the effects of connection flexibility and panel zone deformation on the behavior of plane steel frames. The incorporation of these factors in frame analysis will...
Flexibility of Steel Seismic Moment Connections
Relevant Berkeley experimental results are critically evaluated to determine the flexibility of W18 W24 beam joints with and without stiffeners and/or doubler plates. The paper discusses...
An In-Plane Finite Element Model for Brick Masonry
A finite element model for brick masonry is reported. The model takes account of non linear deformations and progressive local failure. The failure may occur in the joints alone or in...
Nonlinear Macroscopic Finite Element Model for Masonry Walls
A macroscopic finite element model which includes both transverse shear effects and nonlinearity due to cracking has been developed for masonry. These features are accommodated using a...
Wall/Floor-Slab Interaction in Brickwork Structures
The paper summarises the results of three series of tests on sections of brickwork structure carried out with a view to determining the characteristics of wall/floor slab joints in terms...
Notes on Statistics of Failures of Constructed Works
This paper is concerned with both catastrophic and sub-catastrophic failures, which may be categorized into three types: Safety (type S), Functional (type F), and Ancillary (type A). Often...
Failure Statistics Categorized by Cause and Generic Class
Failures can be classified into the three categories, ie. , SAFETY, FUNCTIONAL, and ANCILLARY. Within the causation definition, failures fall into five general areas: DESIGN DEFICIENCIES;...
Failure Investigation Process
The purpose of this paper is to consider the present failure investigation process, in order to assess whether failures are being properly investigated, and also whether sufficient information...
Alternative Procedures for Investigating Failures
Failures of engineered structures continue to occur. This is despite rapid advances in engineering theory, new, more sophisticated methods of analysis, and streamlined techniques for preparing...
Information Availability
There seems to be a great deal of concern about lack of availability of information concerning the results of failure investigations. In most court cases there is virtually no technical...
Failure Information Needs in Civil Engineering
If we are to learn from failures of engineered facilities, failure information must be in a useful form, and it must reach those who can effect improved practice. This paper discusses,...
Learning from Failures
Modern technology and innovation have created a gap between what the design drawings predict with respect to safety and serviceability of a structure and the real safety and serviceability...
Learning from Failures: Procedural Changes in the Design and Construction Process to Reduce Failures
This paper first defines failures and their number and scope in the design and construction fields. It then presents the writer's opinion as to the cause of the failures and...
Failure Investigations in Undergraduate Education
Author stresses the need for failure investigations in undergraduate education especially in Civil Engineering. The civil engineer often creates only one major project of a kind, and is...
Construction Scheduling for Public Sector Projects
The paper presents some types of scheduling systems that are utilized in Postal Service projects as well as the advantages and disadvantages of each. It is suggested that schedule approval...
Return to search