Building of a Conceptual Model at the UE25-C Hole Complex
U.S. Geological Survey and Lawrence Berkeley Laboratory are attempting to construct a conceptual model of the UE25-c hole complex. An interdisciplinary approach is discussed where all...
Combined Analytical/Numerical Approaches to Solving Fluid Flow Problems in the Unsaturated Zone at Yucca Mountain
Various analytical and numerical approaches are presented for the study of unsaturated flow processes in the vicinity of the Yucca Mountain, Nevada, the proposed site of an underground...
Diffusion Coefficients and Hydraulic Conductivity in Unsaturated Hanford Soils and Sediments
Two groundwater transport parameters of some Hanford formation materials, the hydraulic conductivity and the diffusion coefficient, were measured to aid in predicting contaminant migration....
Prototype Testing for the Yucca Mountain Project
The U.S. Department of Energy, through its Yucca Mountain Project Office (YMPO), has been conducting prototype activities in welded and non-welded tuff. These activities are in preparation...
Prototype Heater Test of the Environment Around a Simulated Waste Package
This paper presents selected results obtained during the 301 day duration of the Prototype Engineered Barrier System Field Test (PEBSFT) performed in G-Tunnel within the Nevada Test Site....
Application of Geophysical Methods for Fracture Characterization
One of the most crucial needs in the design and implementation of an underground waste isolation facility is a reliable method for the detection and characterization of fractures in zones...
The Application of Vertical Seismic Profiling and Cross-Hole Tomographic Imaging for Fracture Characterization at Yucca Mountain
In order to obtain the necessary characterization for the storage of nuclear waste, much higher resolution of the features likely to affect the transport of radionuclides will be required...
Modeling of Coupled Heat-Mass-Stress Effects in Geologic Media
To investigate the importance of coupled hydraulic-thermal-mechanical processes for the potential nuclear waste storage repository at the Yucca Mountain, a computer code is being developed....
Origin of Carbonate Deposits in the Vicinity of Yucca Mountain, Nevada: Preliminary Results of Strontium-Isotope Analyses
As part of the paleohydrology study of the Yucca Mountain Project, strontium-isotope analyses of carbonate deposits, ground water, and major rock reservoirs of strontium are in progress....
Reconnaissance ? ??C and ??8O Data from Trench 14, Busted Butte, and Drill Hole G-4, Yucca Mountain, Nevada Test Site
Trench 14 was excavated to investigate the extent of Quaternary movement on the Bow Ridge fault, a north-south structure on the east side of Yucca Mountain. The trench exposes calcite...
Sellafield?From High Level Notoriety to Intermediate Acceptance
After a highly publicised accident at Sellafield, involving radioactive pollution, a period of continuous adverse media coverage eroded public confidence in the plant and its operators,...
Two Citizen Task Forces and the Challenge of the Evolving Nuclear Waste Siting Process
Siting any nuclear waste facility is problematic in today's climate of distrust toward nuclear agencies and fear of nuclear waste. This study compares and contrasts the siting...
Public Attitudes Toward a High-Level Nuclear Repository: Implications on the Prospects of Successful Siting
Recent legislation enacted by the State of Nevada makes it illegal to store high-level nuclear waste (HLNW) within state, posing a serious threat to the federal government's...
Spent Fuel and High-Level Waste Management in Selected Countries: Trends and Issues
This paper contains descriptions of the major parameters and plans for management of spent nuclear fuel and high-level radioactive wastes in Belgium, Canada, France, the Federal Republic...
Spent Fuel Storage Requirements for Nuclear Utilities and OCRWM
Projected spent fuel generation at U.S. power reactors exceeds estimated aggregate pool storage capacity by approximately 30,000 metric tons of uranium (MTU). Based on the current repository...
Site Selection Criteria for Constructing an Independent Spent Fuel Storage Installation (ISFSI) at a Commercial Nuclear Power Plant
Commercial nuclear power plants in the U.S. are responsible for providing their own interim storage for excess spent fuel. A facility located onsite, acting as a buffer between in-pool...
Choosing AT-Reactor Spent Fuel Storage Technologies
Need for expansion of the spent fuel storage capability of reactor sites was first caused by delays in construction of reprocessing facilities, later by cessation of commercial reprocessing...
Concrete Cask Storage Technology
The paper presents the design and operation of the new dry storage system for nuclear waste. The system was designed by complete nuclear, thermal-hydraulic and structural analysis to the...
Vapor Hydration and Subsequent Leaching of Transuranic-Containing SRL and WV Glasses
High-level nuclear waste glass that is subject to disposal in the proposed unsaturated environment at Yucca Mountain, Nevada, initially will be altered through contact with humid air....
Recent Results on the Effect of Gamma Radiation on the Durability and Microstructure of DWPF Glass
The effect of gamma radiation on the durability and microstructure of a simulated nuclear waste glass from the Savannah River Site has been carefully investigated. Three large pieces of...
Return to search