Investigation of Catastrophic Failure of a Premium-Alloy Railroad Rail
In November 1983 an Amtrak train derailed at a speed of 72 mph (115 kph) at Woodlawn, Texas (in the vicinity of Marshall, Texas), resulting in four fatalities and twenty-four serious injuries....

Tension-Compression Test of a Concrete Specimen Via a Structure Damage Theory
The concrete sample is assumed to consist of a large number of aggregates and cement paste. Their material properties are assumed to be perfectly elastic. The effective elastic property...

Time-Dependent Damage and Creep of Brittle Rock
In this paper, some results of a combined analytical-experimental study of the relationship between subcritical microcrack growth due to stress corrosion and the time-dependent deformation...

Continuum Modeling of Discrete Structures with Geometric Nonlinearities
The modeling of geometrically non-linear discrete structures by an equivalent continuum is presented. The discrete-continuum analogy is developed by first isolating a unit cell of the...

Use of Computer Graphics in the Analysis of Large Space Structures
This paper illustrates how interactive computer graphics can provide a useful tool in setting up analytical models of structural latticeworks comprised of large numbers of degrees of freedom...

Damage Detection in Periodic Structures
Nondestructive damage detection in periodic structures using continuum analogues of the discrete structure is studied. Algebraic equations relating changes in eigenfrequencies to the fractional...

On Cyclic Testing with Thin Long Hollow Cylinders
The hollow cylinder device has emerged in recent years as an important tool in the investigation of the dynamic behavior of soils. This paper reviews the stress conditions present in the...

Liquefaction Flow Failure of Silty Sand by Torsional Cyclic Tests
The use of undrained strain-controlled cyclic torsional loading of anisotropically consolidated triaxial specimens (CyT-CAU tests), is proposed for evaluating liquefaction flow failure...

Torsional Simple Shear Apparatus for Drained and Undrained Cyclic Testing
Since a cyclic triaxial compression apparatus was first used to study liquefaction of saturated sandy soil, many different types of cyclic shear devices have been used to investigate drained...

Aspects of Constant Volume Cyclic Simple Shear
Data from cyclic simple shear tests comprise the foundation on which rests most of the practical applications of theoretical soil dynamics. The importance of the test derived from two...

Multi-Directional Irregular Loading Tests on Sand
In order to clarify the effects of irregular and multi-directional nature of load application on soil deposits during earthquakes, multiple series of laboratory tests were conducted on...

Cyclic and Monotonic Undrained Response of Saturated Sands
A unified picture of the undrained monotonic and cyclic loading response of saturated sands is presented. A wide range of initial states of sand are covered in order to consider a full...

Small Strain Measurements Using Triaxial Apparatus
This paper presents a detailed testing methodology which can be used to determine the cyclic properties of soils at very small strains using triaxial apparatus. A discussion of specific...

Shear Moduli Measurements under True Triaxial Stresses
The effect of state of stress on the shear wave velocity and shear modulus of a dry sand was examined. Testing was performed in a large-scale triaxial device in which cubic soil samples...

Lab Measurements of Gmax Using Bender Elements
This paper describes in detail the installation and use of piezoceramic bender elements in a variety of standard geotechnical laboratory testing equipment at NGI (e. g. , triaxial, direct...

Evaluating Nonlinear Soil Behavior Using the Resonant Column
An analysis is presented that attempts to match a mathematical model to the nonlinear behavior obtained from the resonant column test. This model consists of an oscillator with a restoring...

Cyclic Simple Shear, Torsional Shear and Triaxial�A Comparative Study
Many different testing apparatus are used to duplicate in laboratory soil samples the stress state generated in situ by earthquakes. A wide diversity of data has been generated and this...

Uplift Behavior of Shallow Soil Anchors?An Overview
An overview is presented of the static uplift (tensile) behavior of shallow anchors used for foundations in soil. Basic anchor types are described, and their general installation and behavioral...

Uplift Capacity of Helical Anchors in Clay and Silt
The results of a study on the uplift capacity of helical anchors in clay and silt are presented. Full-scale field tests and one-quarter scale laboratory tests were conducted in each soil...

Energy Forecasting Techniques: An Overview
This paper provides an overview of the primary forecasting techniques employed by electric and natural gas utilities to predict energy consumption and demand. Although the techniques discussed...

 

 

 

 

Return to search