Roughness Coefficients of Large Floods
Most hydraulic calculations of flow in channels and overbank areas require an evaluation of flow resistance generally expressed as Manning's roughness coefficient, n. Literature...
Diversion Structure for Peak Flow Reduction
The flood control requirements of a planned development in the City of Orange, California were such that the peak discharges ranging from an annual flood up to 25-year return period be...
Non Linear Economic Models for Crop Production
Most economic models for crop production rely on the traditional linear programming approach, in spite of the fact that the objective function is almost always non linear. This paper briefly...
Crop Production Models in Water Management
A weather generating model called WMAKER is introduced. The model generates daily climatic data based on the mean monthly values of temperature, precipitation, number of rainy days and...
The Use of Spread Sheets in Water Resources Planning
With the advent of 'spread sheets' in the microcomputer explosion, a tool is available for the first time to greatly simplify many engineering procedures. This...
Hydrologic Design Criteria for Dams with Equal Reliability
Appropriateness of design criteria which require using the same Antecedent Moisture Condition (AMC) throughout Kansas for sizing dams and emergency spillways was examined. AMC values which...
Sprinkler Erosion Model
The Soil Conservation Service has developed a model to evaluate the effect of various sprinkler irrigation systems with associated agronomic practices. Many researchers have dealt with...
A Simulation Procedure for On-Farm Irrigation Systems Planning
A simulation modeling package has been developed for modeling on-farm irrigation water supply and application systems. The modeling package can consider up to 6 different application systems...
Bowen Ratio and Penman: Australian-California Tests
Results are presented of evapotranspiration (ET) studies conducted in Davis, California and at two locations in Australia. Good agreements were obtained in early comparisons of Bowen Ratio...
Calibration of an Evapotranspiration Model Using Eddy Correlation Methods
An evapotranspiration (ET) prediction model was developed by calibrating the H. L. Penman equation for an alfalfa reference crop in the southwestern Oklahoma region. Evaporative flux for...
Effective Precipitation in Irrigation Design and Management
Effective precipitation is important in irrigation system design and operation. Numerous methods for estimating effective precipitation have been proposed in the past, including direct...
The Relationship of Benefits to System Size for Irrigation Projects
This paper presents a generalized linear programming (LP) and farm budget model for optimization of on-farm irrigation benefits resulting from variations in irrigation project size. The...
Considerations for Sizing Water Delivery Systems
The purpose of a water delivery system is to deliver irrigation water to a farm and its design should be based on meeting the requirements of farm water use. The rate, duration and frequency...
Daily Diversion Forecasting for a Large Irrigation Project
A procedure has been developed and tested to forecast demand-type large irrigation diversions on a daily basis. The model is based on hydrologic concepts as well as irrigation scheduling...
Crop-Water Production Functions and System Design
A Task Committee to evaluate application of crop-water production functions to irrigation system design and management was established by the ASCE Irrigation Water Requirements Committee...
Meixner Functions Model Crop Yield vs. Applied Water
Most crop production functions are reported as linear functions even though everyone knows they are not. The few examples of non linear crop production functions that exist in the literature...
Infiltration as a Dependent Variable in Modeling Furrow Irrigation
Most surface irrigation models assume that infiltration is independent of surface flow hydraulics. However, wetted perimeter has been shown to significantly affect infiltration in furrows....
An Overview of Factors Affecting Land Application of Food Processing Wastes
The food processing industry can use slow rate, rapid infiltration or overland flow systems. Slow rate systems are the most common method used for land application. The limiting design...
Steady State Fluid Transport Model for Plants
Knowledge of water potentials throughout the xylem and phloem elements as well as in individual cells is fundamental for understanding effects of water and temperature stress on transport...
Estimating Number and Duration of On-Times for Surge Irrigation
Research shows surge flow can achieve efficient and uniform irrigation on some soils. However, most available information focuses on computerized analysis and modeling for research purposes....
Return to search