ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Stochastic Simulation of Mass Transport in Heterogeneous Formations Using Hard and Soft Conductivity Data
The mass transport in a synthetic 2-D heterogeneous formation is simulated through the Monte-Carlo method using continuum approach. The simulated hydraulic conductivity field are generated...

Summary of Revised Potentiometric-Surface Map for Yucca Mountain and Vicinity, Nevada
The revised map for the potentiometric surface of the uppermost saturated zone in Tertiary volcanic rocks at Yucca Mountain, Nevada, is based mainly on 1988 water levels. Refinement of...

Isotopic Evidence of Complex Ground-Water Flow at Yucca Mountain, Nevada, USA
Strontium isotopes (expressed as per mill deviation from mean sea water, ?⁸⁷Sr) reflect interaction between ground water and the aquifer through...

Subsurface Transport of Radioactive Material Using Adaptive Finite Elements
A finite element method which utilizes mesh adaptation is used to calculate transient groundwater flow and pollutant transport. Mass lumping and reduced integration are employed to enhance...

The SECO Suite of Codes for Site Performance Assessment
Modeling for performance assessment of the Waste Isolation Pilot Plant (WIPP) has led to development of the SECO suite of codes for groundwater flow, particle tracking, and transport....

Groundwater Flow Modelling for the TVO-92 Safety Analysis of Spent Fuel Disposal
The TVO-92 safety analysis of spent fuel disposal is based on preliminary site investigations carried out at five sites in Finland between 1987 and 1992. Groundwater flow analyses have...

Modeling of Saturated Zone at Yucca Mountain, Nevada
This paper presents preliminary results of groundwater modeling of the saturated zone in the vicinity of Yucca Mountain. The analysis used both a regional (approximately 250 ? 250 km)...

A Galerkin Method for the Convection?Diffusion Equation Using Asymmetric Weighting Functions
A variation of the Petrov-Galerkin method of solution of a partial differential equation is presented in which the weight function applied to the time derivative term of a one-dimensional...

Characterization of Porosity in Support of Mechanical Property Analysis
Previous laboratory investigations of tuff have shown that porosity has a dominant, general effect on mechanical properties. As a result, it is very important for the interpretation of...

Micromechanics of Deformation in Topopah Spring Tuff, Yucca Mountain, Nevada
Samples of Topopah Spring tuff from Yucca Mountain, Nevada have been tested and analyzed. Laboratory tests conducted include standard uniaxial and triaxial compression tests, and special...

Isotopic and Trace Element Variability in Altered and Unaltered Tuffs at Yucca Mountain, Nevada
Reference stratigraphic sections near Yucca Mountain, Nevada were established and sampled in outcrop areas where the volcanic rocks have been minimally altered. Isotopic and trace element...

Aperture Characteristics, Saturated Fluid-Flow, and Tracer-Transport Calculations for a Natural Fracture
We used surface-profile data taken with a noncontact laser profilometer to determine the aperture distribution within a natural fracture and found the surfaces and apertures to be isotropic....

Mercury Porosimetry Studies on a Natural Fracture
Mercury porosimetry techniques were used to study the effects of stress on the capillary pressure characteristics of a single natural fracture. In addition, permeability measurements were...

Small-Scale Behavior of Single Gravity-Driven Fingers in an Initially Dry Fracture
Experiments investigating the behavior of individual, gravity-driven fingers in an initially dry, rough-walled analog fracture are presented. Fingers were initiated from constant flow...

Flow Visualization and Relative Permeability Measurements in Rough-Walled Fractures
Two-phase (gas-liquid) flow experiments were done in a natural rock fracture and transparent replicas of natural fractures. Liquid was injected at constant volume flow rate, and gas was...

Modeling Gravity-Driven Fingering in Rough-Walled Fractures Using Modified Percolation Theory
Pore scale invasion percolation theory is modified for imbibition of wetting fluids into fractures. The effects of gravity, local aperture field geometry, and local in-plane air/water...

Wetting Front Instability in an Initially Wet Unsaturated Fracture
Experimental results exploring gravity-driven wetting front instability in a pre-wetted, rough-walled analog fracture are presented. Initial conditions considered include a uniform moisture...

Experimental Studies to Calibrate Unsaturated Flow Models
Work is described that has been designed to serve as a laboratory calibration of numerical models for unsaturated flow studies. The experiment size is configured large enough that the...

Stochastic Modelling of Groundwater Flow at the WIPP Site
A stochastic approach to modelling the groundwater flow in the vicinity of the WIPP site in New Mexico is described. A geostatistical model of the transmissivity of the Culebra dolomite...

Application of Indicator Geostatistics to the Gorleben Data Set
This paper describes a trial application of Indicator geostatistical methods to borehole data from the Gorleben site. Indicator variograms have been estimated from the site data and fitted...

 

 

 

 

Return to search