Estimating Sediment Relative Density Using an Impact Core Sampler and Wave Equation-based Pile Analysis
This paper presents a case history in which soil sample drive resistance was modeled with a wave equation-based pile analysis computer program to estimate in situ sediment relative densities...
Computer Implementation of Fuzzy Reasoning in Tendering
There are a lot of risk factors need to be considered in tendering in the construction industry. Examples are a) The market conditions: the degree of competition, the prevailing and the...
Numerical Modeling of Initial Ground Movement in an Instrumented Superconducting Super Collider Shaft
A 5.5 m diameter shaft was sunk into a rock formation of Taylor Marl to a depth of 61 m at the Superconducting Super collider (SSC) site. Numerical modeling using finite difference analysis...
Mat Foundation Design: An Historical Perspective
Nearly a half century ago, Karl Terzaghi rationalized the analysis and design of mat foundations with the conclusion that subgrade reaction was the most important variable. Soon after...
WAK and Full-Scale Load Tests on Granular Fill
For footings on granular fill that includes cobble- and boulder-size materials, in situ tests cannot be used to estimate foundation settlement because such fill is difficult to explore...
An Alternative Formulation of Volume-change Behavior of Soils
The traditional approach based on the semi-logarithmic representation of volume change data is known to work relatively well for prediction of ground settlements. This approach has been...
Settlement of Large Mat on Deep Compressible Soil
This case history describes the settlement analyses for a large load compensated (floating) mat foundation on a deep deposit of normally consolidated clay of variable thickness. Large...
Influence of Flexible Mat on Settlements of Marine Clay
Highly compressible marine clays occur extensively in coastal regions. In lieu of traditional pile or raft foundations in such weak soils, recently a flexible mat system has been developed...
Settlement and Deformation Response of a Bridge Footing on a Sloped Fill
The problem of settlement of spread footings located within or near granular slopes has been investigated in the laboratory using a large testing facility. Based on these results, footings...
Settlement of Deep Compacted Fills in California
Measured settlement of deep compacted engineered fills from a single site were summarized and compared to data from other sites. The data indicate that the rate and magnitude of movement...
Management of Dredged Material Placement Operations
Non-linear finite strain consolidation theory is used to predict the settlement of fine-grained dredged material due to self-weight and surcharge-induced consolidation. Finite strain consolidation...
The Role of Shale Pores in Settlement
Waste fills resulting from the mining of coal in Appalachia should ideally consist of large, free-draining sedimentary rock fragments. The successful performance of these embankments is...
Settlement of Compacted Fills Caused by Wetting
Post-construction wetting of fills can cause swell or compression, depending on soil composition and stress conditions just before wetting. The various factors affecting swell/compression...
Case History of a Collapsible Soil Fill
Collapse settlement of a deep compacted fill led to damage of a group of condominium units. The fill consisted of a highly heterogeneous mixture of coarse- to fine-grained soil containing...
Subjective De-Biasing of Data Sets: A Bayesian Approach
In this paper, we examine the relevance of data sets (for instance, of past incidents) for risk management decisions when there are reasons to believe that all types of incidents have...
Treatment of Oil in Water Emulsions by Ceramic-Supported Polymeric Membranes
A novel membrane was developed by growing polymer chains from the surface of a porous ceramic support, resulting in a composite membrane which combines the mechanical properties of the...
Evaluation of Fe oxide-coated GAC for removal and recovery of Cu(II) from water
A composite solid, prepared by precipitating an Fe oxide onto granular activated carbon (GAC), was evaluated as an adsorbent for the removal and recovery of Cu(II) from water. Relative...
Chelating Composite Membrane: Its Application in Selective Heavy-Metal Solid-Phase Separation
Selective removal of small amounts of heavy metals from the background of large amounts of innocuous sludge or slurry is a challenging separation problem. Conventional fixed-bed sorption...
Modeling of Chemical Inhibition of Nitrification
This work contains two quantitative structure-activity relationships (QSARs) modeling chemical inhibition of nitrification, one for heterocyclic compounds and one for acetylenic materials....
Colloidal Fouling of Reverse Osmosis Membranes
Experiments on the fouling of thin film composite and cellulose acetate reverse osmosis membranes by aluminum oxide colloids are reported. Fouling was significant at high ionic strengths,...
Return to search