A Shear Locking Free Three-Node Triangular Plate Bending Element for Moderately-Thick and Thin Symmetrically Cross-Ply Laminated Plates
A shear locking free three-node triangular plate bending element based on Reissner/Mindlin theory for symmetric general cross-ply laminated plates is developed. The element has total nine...
Ultrasonic Wave Scattering by a Crack in a Composite Plate
A hybrid method is presented for analyzing ultrasonic wave scattering of plane strain waves by a crack in a composite plate. The hybrid method combines a finite element formulation in...
Random Initial Heterogeneity and Degradation in Brittle Materials
The question of implementation of the initial state of the material is addressed. The problem is tackled by assuming random initial values for a relevant variable, within a prespecified...
Wave Propagation in a Nonlocal Strain-Softening Continuum
The problem of wave propagation in a nonlocal strain softening solid is first discussed analytically. It is demonstrated that 'loading' waves can still propagate in the strain softening...
On the Role of Dispersive Waves in Strain-Softening Media
Wave propagation in strain-softening continua is investigated numerically and analytically. It is argued that localisation which typically acts as a precursor of failure, can only be described...
Postbuckling Behavior of Stiffened Composite Shell Panels
The paper summarizes the current status of an ongoing study on the postbuckling behavior of thick and moderately thick composite stiffened shells. Axially compressed moderately thick panels...
Regularization Methods for Identification of Structural Damage
Generally, various non-unique solutions may be obtained from ill-conditioned equations. Several methods are available to obtain a unique (minimum energy) solution to a modified and thus...
An Evaluation Study of Modified Mohr-Coulomb and Cap Models
Two failure criteria, namely Mohr-Coulomb and cap models, are considered in this paper with some modifications. Mohr-Coulomb theory is applied to concrete after stress and strain cut-offs...
Seismic Stability Analysis of Landfill
The failure mechanism of a waste containment system is not well understood due to the complexity and the heterogeneity of the system. The recent slope failure of the Kettleman Hills waste...
Numerical Analysis of Discrete Nonlinear Fracture Mechanics
Because cementitious materials tend to fail by fracture along discrete interfaces, it makes sense to analyze this behavior with discrete nonlinear fracture mechanics. Using the finite...
Computational Framework for 3D Nonlinear Discrete Crack Analysis
Under contract from the Electric Power Research Institute (EPRI) to investigate the applicability of fracture mechanics to concrete dams, the authors are involved in the development of...
Random Response of Multicrystalline Structures
An approach to the probabilistic modelling and analysis of multicrystalline microfabricated beams is presented with application to micro-electro-mechanical systems (MEMS). Random, textured...
Stochastic Mixed Finite Difference Method
Some aspects of numerical solutions of stochastic mechanics problems are considered. The Finite Difference method for discretization of stochastic continuous media problems is discussed....
An Elastoviscoplastic Model for High Strength Concrete
An elastoviscoplastic model of overstress type is proposed for high-strength concrete in this study. With its viscosity parameters determined with experimental data from the split-Hopkinson-pressure-bar...
Reduced Basis Technique for Nonlinear Vibrations of Composite Panels
A reduced basis technique and a computational procedure are developed for the nonlinear free vibrations of composite panels. The computational procedure can be conveniently divided into...
Experimental Investigation of Bending and Twisting Coupling in Thin-Walled Composite Beams
The behavior of a thin-walled ppen section composite material beam depends on the anisotropic mechanical properties of the panels that form the beam. A beam theory has been proposed for...
Predicting the Performance Limits of Soil-Culvert Systems
A finite element model for elastic plastic large deformation analysis of soil-culvert systems is presented. Predictions of this numerical model are in good agreement with failure tests...
Finite Element Large Deflection Analysis of Cylindrical Shells with Different Types of Cutouts
Nonlinear finite element is used to find the elastic buckling load and the maximum deflection for cylindrical shells subjected to unsymmetrical pressures due to wind. These shells are...
Nonlinear Eigensolver for Exact Vibration Analysis
Vibration analysis of structural systems is concerned with accurately predicting the free vibration modes and frequencies of the vibrating system. This analysis process involves two general...
Eigenproperties of a Twisted, Nonuniform Rotating Beam by the Finite Element Method
A initially twisted blade with nonuniform properties along the length, is rotating with constant angular velocity about an axis perpendicular to it's elastic axis. The blade is modeled...
Return to search