Tracking Seismic Hazards
Union Station in downtown Portland, Ore. is a historic landmark but also a seismic risk. Engineers were charged with making a priority list of hazards so that the owners could prioritize...
Grouting
Compaction, Remediation and Testing
This proceedings,
Structural Design of Closure Structures for Local Flood Protection Projects
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 21 This guide provides a framework for the structural...
A Bridge for the 21st Century
The authors write about the cable spinning process used in the Great Belt East Bridge project in Denmark. The bridge, when completed, will be the largest suspension bridge in the world....
Saving the Bluffs: Engineering at the Edge
Erosion and landslides along the bluffs bordering the Mississippi River in Natchez, Miss. became an emergency situation when the only road to residents below the bluff was cut off from...
Analysis
This section presents theoretical and practical concepts for the analysis of guyed transmission structures. The concepts are further illustrated in the examples of Section 8. The term...
Re-engineering Cowboy Heaven (Available only in
On a wooded hill overlooking the north end of Oklahoma City sits one of the foremost repositories of this country's Western heritage, the National Cowboy Hall of Fame. Contained...
Capital Facelift Takes Flight
Since 1988, one of the largest and most complex airport renovation projects in U.S. aviation history has been under way in Washington, D.C. Known as the Capital Development Program, the...
Small Inocula Can Effect
This is the first report of colonization of soil by small numbers of a genetically engineered microorganism. The study suggests that the addition of small inocula of D5 to contaminated...
Numerical Modeling of Water Flow over Porous Media
The momentum transport phenomena at the interface of porous media and fluid are numerically investigated. The single domain approach is used with matching boundary conditions; i.e., the...
Synchronized Measurements of Bed-Shear Stress and Flow Velocity in Open Channels with Simulated Vegetation
Synchronized measurements of shear stresses at the bed and velocities both within and above a simulated plant canopy in an open-channel flow are presented. Traditional (hot-film sensors)...
Contraction Scour at Bridges: Analytic Model for Coarse-Bed Channels
Contraction scour at bridges spanning coarse-bed channels is evaluated based on mass conservation of both water and transported sediment between a reference channel section near the crossing...
Implementation of Watershed Planning in Chester County Pennsylvania
The author presents portions of a study into the current watershed regulatory framework in Pennsylvania, and how effectively this framework supports watershed sustainability when faced...
Sediment Erosion Rate in the Baltimore Harbor
In-situ erosion experiments were conducted at four selected sites in the Baltimore harbor in May 1995 using the VIMS Sea Carousel. The measurements showed that the erosion rate decreased...
Designs for Blast Protection (Available only in
The 1995 bombing of the Murrah building in Oklahoma City was the most deadly terrorist act in this country's history. What can engineers do to prevent such events in the future?...
Civil Engineering History
Engineers Make History
The proceedings,
The Northridge Fractures: Are We Learning the Right Lessons?
After the Northridge earthquake in January 1994, engineers found problems with special moment-resisting frames. There were multiple facture modes, and typical damage involved primary crack...
Study of Interaction Between Pneumatic Spherical and Cylindrical Form Shells Subjected to Wind Pressure
In the design of pneumatic membrane structures, analysis of stress and deformations of structures subjected to wind is among the most important requirements. For the purpose of studying...
Postbuckling Response of Doubly-Curved Shallow Panels Under Complex Loading Conditions
The static postbuckling of laminated doubly-curved shallow panels subjected to the complex action of a system of in-plane compressive edge loads and a transverse pressure field is investigated....
Analysis of Composite Panels Using Newton's Method
Postbuckling response prediction of composite panels using Newton's method will be discussed. The traditional approach of nonlinear finite element analysis is to use a Newton-Raphson approach...
Return to search