New Construction Materials Proliferate in Japan
Research and development of new construction materials is extensive in Japan, and many new materials are being used in Japan now. The author analyzes the research environment in Japan,...

Large Deformation Theory Using Truncated Rotations
Today's aerospace industry has advanced to the point of using optimum design techniques in virtually all applications. In structural elements, orthotropic fiber composite materials have...

Damage Tolerance of Thin Composite Reinforced Membrane Structures
Structural performance of fiber reinforced flexible composite membranes, designed as pressurized shelters for space exploration, is investigated via computational simulation. An integrated...

Late Stage Damage in G30-500/PMR-15 Laminates
Damage progression has been studied experimentally under tension using [02/906]s...

Reservoir Estimates for the Sulpicius Gallus Region
Estimates presented here show that 1.1?109 metric tons of oxygen could of produced from one of the enriched areas that have been detected by spectrographic...

Effects of Dust and Thermal Cycling on Telescope Mirror Performance
In this study, 1 cm ? 1 cm square optical-grade aluminized glass mirrors were measured for maximum light reflectance and then the loss of reflectance due to the presence of different specific...

Carbon Formation Theory for Space Oxygen Processes
Production of oxygen from the Martian atmosphere or lunar soil and the recovery of oxygen in manned space environments may include carbon formation from CO as a unit process. Thermodynamic...

Analysis of Glass-Ceramic Production from Lunar Resources
Two simulated regoliths were used to investigate the effects of processing and composition on the properties of lunar-derived glass-ceramics. For the simulant with moderate iron concentration,...

Impulsive Punching of Fiber-Reinforced Concrete Slabs
The behavior of FRC slabs reinforced with polymeric fibers (polyacrylonitrile fibers PAN) and subjected to impulsive punching is analyzed here in order to clarify to what extent the fibers...

FRP Box-Beams Under Long-Time Static and Fatigue Loading
This paper discusses experimental and analytical aspects of the long-time behavior of filament wound E-glass fiber reinforced epoxy-box-beams. Theoretical and experimental data are compared...

Local Buckling of Pultruded FRP Beams: Theory and Experiment
A continuing experimental and theoretical investigation of the local compression flange buckling of commercially produced pultruded fiber-reinforced plastic (FRP) beams is briefly described...

Dynamic Response of Steel Fiber Reinforced Concrete
Extensive research has been done on the static properties of steel fiber reinforced concrete, but very little on the dynamic properties. A total of 20 beams was tested. The steel fiber...

Testing of Concrete Curtain Wall Panels Reinforced with FRP Grids
The objective of this paper is to evaluate the suitability of Fiber Reinforced Plastic (FRP) grids for use as a structural; reinforcement in concrete curtain wall panels. This paper describes...

Bulb-T and Glulam-FRP Beams for Timber Bridges
In this paper, we discusses the manufacturing, analysis, and testing of two glulam beam designers:(1) Southern pine bulb, and (2) yellow-poplar reinforced with pultruded fiber-reinforced...

Anchorage of Non-Metallic Prestressing Tendons
Experimental confirmation tests were conducted to evaluate mechanical and epoxy socketed anchors for fiber reinforced plastic (FRP) prestressing tendons. The studies found that a parabolically...

Nonlinear Analysis of Prestressed Concrete Structures
This paper presents a finite element model for the nonlinear analysis of prestressed concrete structures. The model can be used to analyze pretensioned or posttensioned, bonded or unbonded...

Glass-covered Lightweight Spatial Structures
The double curved reticulated spatial structure with triangular mesh is the most favorable basis for a translucent roof. But this structure, especially is directly glazed without intermediate...

Research of Strength and Deformations with Long-time Loading and the Use of Glassfiber Reinforced Concrete in Shells
Presented is an experimental research on the properties of behavior on compression and tension of glassfiber reinforced concrete of alkali-resistant glass fiber under long-time load and...

A Practical Design and Construction of Tension Rod Supported Glazing
In designing a glass skin-covered space, for the atrium, entrance hall or other core part of a building complex, the high openness and quality requirements of the space often lead to the...

Control of Odor and VOC Emissions at Wastewater Treatment Plants -Boston Harbor Case Study-
Siting of the new wastewater treatment plant (WWTP) for the Massachusetts Water Resources Authority (MWRA) in Boston was based on an assumption of mitigation of total reduced sulfur (TRS)...

 

 

 

 

Return to search