Empirical Prediction of Strong Ground Motion
In 1982, we published equations for the prediction of various measures of ground motion as a function of earthquake magnitude, distance from the earthquake rupture, and site geology. Many...
Hybrid Control of Seismic-Excited Bridge Structures Using Variable Dampers
A method of control for seismic-excited buildings or bridge structures using variable dampers is presented. The control method is based on the theory of variable structure system (VSS)...
Wind-Induced Vibrations of Tall Buildings Using Tuned Mass Damper
A Lagrange formulation is applied to tall buildings using tuned mass damper. The resulting equations of motion are analyzed using a frequency window method. The method reduces the computational...
A Galerkin Method for the Convection?Diffusion Equation Using Asymmetric Weighting Functions
A variation of the Petrov-Galerkin method of solution of a partial differential equation is presented in which the weight function applied to the time derivative term of a one-dimensional...
A Computational Method for Acquiring Response and Ground Motion from Accelerogram on the Base of Structure
This paper describes computational formulation of vibratory equations for acquiring response and input ground motion from accelerogram on the base of long structure with flexible slab....
Coastal Processes on the Wai-San-Ding Barrier of Taiwan STrait, R.O.C.
The coastal line processes on the Wan-San-Ding Barrier is discussed in this paper since 1900. The wave energy along this coast is computed from the measured wave by considering the refraction...
Friction Factors in Coastal Flooding
As the world's coastal zones are being developed and the coastal population increases, coastal flooding, or rather the prediction of its extent and frequency of occurrence, becomes a more...
Uptake of Contaminants by Overland Flow
A mathematical model is developed for the uptake of contaminants by overland flow. The model is based on the numerical solution of the Navier-Stokes equations coupled with a two-equation...
Multiquadrics in Engineering Modeling
The theory of multiquadrics (MQ) is advancing rapidly and it is usable today. When appropriate MQ can accurately interpolate for unknown values with less computational cost than Kriging....
An Optimal Parameter Estimation Model for Groundwater Resource Management
An optimal parameter estimation model is developed to identify the locations of wells, to determine pumping magnitude, and to calculate transmissivity coefficients in a confined aquifer...
Problems with Numerical Modeling of Gravel-Bed Rivers
Inherent to one-dimensional numerical models are the assumptions that hydraulic parameters can be assigned a characteristic average value, and that the flow is gradually varied so that...
Numerical Solution of Transient Closed-Conduit Flow Equations by the Method of Lines Along Characteristics
The method of characteristics has long been considered as a natural technique for solving transient closed-conduit problems. In this paper, by using the concept of the method of lines,...
Kenetic-theory Approach to the Nevado Del Ruiz 1985 Debris Flow
The Nevado del Ruiz 1985 debris flow was the worst disaster of its kind in this century, killing 22,000 people. By making an idealization of the debris flow material and the flow regime,...
Comparisons Between Experimental and Numerical Studies on Laminar Flow with Tracer Transport
In this paper we present an experimental and an accompanying numerical study of two- and three dimensional transient flow and tracer transport in complex flow systems at low Reynolds numbers....
Debris Flow Initiation and Termination in a Gully
A comprehensive simulation model predicting the debris-flow discharge hydrograph, solids concentration in it and the process of variation of the channel due to vertical as well as lateral...
Composite Beams: Redistribution, Reliability, and Lateral Buckling
Research relevant to three aspects of the design of composite beams for ultimate limit states is summarized. These are: the redistribution in continuous beams and in framed structures...
Two Full-Scale Tests of Class 3 Composite Beams
This paper presents two tests of continuous composite beams comprising two 7.5 m spans and two concentrated loads close to the intermediate support. Although the cross-sections on the...
Ductility Effects of End Details in Composite Beams
A limit states criterion is described for quantifying the rotation capacity of members in indeterminate structures as a means of classifying ductility of structures during plastic behaviour...
Longspan Bridges with Double Composite Action
Continuous steel composite bridges with double composite action have, besides the concrete roadway slab, a concrete bottom chord at the haunches over the main piers. This concrete bottom...
Application and Recent Development of a Numerical Model for Composite Beams with Partial Shear Connection
This paper deals with numeric analysis of composite steel and concrete beams for loads up to the ultimate beam capacity. Two versions of a numerical model are presented addressing such...
Return to search