Reinforced Concrete Beam
This chapter discusses the tabulation of reinforced concrete beam data in Microsoft Excel....
The New Tacoma Narrows Suspension Bridge Introductory Project Information
On September 25, 2002, Notice-to-Proceed for a design-build agreement was issued by the Washington State Department of Transportation (WSDOT), directing Tacoma Narrows Constructors (TNC),...
Analysis of Dynamic Laterally Loaded Pile in Clay
Deflections of laterally loaded pile groups are strongly affected by the degree of pile head fixity. If the cap provides perfect restraint against rotation, deflections are only about...
Zemmouri, Algeria, Mw 6.8 Earthquake of May 31, 2003
Prepared by the Earthquake Investigations Committee of the Technical Council of Lifeline Earthquake Engineering ASCE. This TCLEE Monograph summarizes...
Toronto Takes Off
Travelers using Toronto's Pearson International Airport will soon be passing through a new, state-of-the-art terminal, the centerpiece of a 10-year airport redevelopment project....
Making the Grade
Adding two lanes to a stretch of highway in western Colorado required excavation on slopes and involved micropiles, mechanically stabilized earth walls, ground anchors, and soil nails....
Micropiles to the Rescue
When a Michigan energy concern began upgrading the equipment in one of its operating power plants, engineers were asked to find an economical and nondisruptive way to support the new loads...
Life-Cycle Environmental Accounting and Decision-Making for Bridge Structures
This presentation focuses on life-cycle environmental accounting and decision-making for bridge structures using the example of steel and steel-reinforced concrete....
Torsion of Reinforced Concrete -A Historical Overview
The story of torsion of reinforced concrete must start with the French professor, C. L. Navier. In his landmark book (Navier, 1826) he rigorously derived the first rational theory for...
Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...
Advances in Analytical Modeling of Torsional Members
The basic formula for calculating the torsional strength of reinforced concrete members was developed by Rausch (1929) using the space truss concept. Unfortunately, Rausch's equation may...
Members Subjected to Torsion Combined with Other Actions
The combination of torsion with bending and shear (T-M-V) in members with both transverse and longitudinal reinforcement is the most commonly encountered combination in practical cases....
Detailing and Design Examples for Torsional Members
The nature of the internal force flow in a concrete member subject to torsion brings about both longitudinal and transverse force components. The resulting tension brought about by the...
Par Excellence
A 50-year-old Brownfield with a mountainous pile of steel slag has been remediate and developed into a recreational site that boasts a free golf course for inner-city youth, a championship-quality...
Evaluation of the CON-ARCH reinforced Concrete Buried Arch System
Final Report
This report summarizes the evaluation of the Con-Arch culvert system marketed by Hunter Contracting, Co. of Tucson, Arizona. The evaluation consisted of computer analysis and field testing of two Con-Arch...
Pressure Relief
When the two basins making up a 90 acre reservoir in New York needed to be emptied and cleaned, engineers decided to use the 2,750 ft (840 m) long concrete wall dividing them as a dam....
Building the Olivenhain
Engineers in California were hired to create a reservoir capable of providing the San Diego region with 24,000 acre-feet of water during an emergency shortage. The result is the Olivenhain...
A Higher Profile
After an extensive inspection revealed severe corrosion to the substructure of a low-lying bridge over salt water in Norfolk, Virginia, engineers devised a retrofit that included vertical...
Use of Fiber Reinforced Polymer Composites as Reinforcing Material for Concrete
Although the potential of continuous fiber reinforced polymers (FRPs) was recognized more than 50 years ago, bottlenecks such as vulnerability to static fatigue, ultraviolet radiation,...
An Alternative Approach
An innovative foundation system at a Virginia power plant relies on columns constructed via jet grouting to support elevated units that reduce pollution. The approach required less drilling,...
Return to search