An Uncertainty Analysis Methodology Applied to Sheetpile Cofferdam Design
The input data to numerical simulation models is often uncertain, and, consequently, model predictions may be uncertain. Such uncertainties are often treated by Monte Carlo techniques....
Modeled Effects of Hydraulic Mixing Devices on Reservoir Water Quality
A two-dimensional reservoir water quality model was used to evaluate effects of hydraulic mixing devices on release and water quality. Seasonal simulations of Douglas Reservoir water quality...
Density Currents in Clarifiers
This paper discusses internal flow regimes associated with the density currents due to diurnal heat loading. The reported studies were carried out with the aid of physical models....
Penetrative Convection in Mixed Layer Models
While surface heat transfer is important in lakes and reservoirs, solar radiation, which penetrates the water surface and is absorbed in the water column, also exists. In this work, a...
Air Regulated Siphons as Irrigation Canal Outlets
This paper investigates the possibility of using air regulated siphons as outlets from irrigation canals. Although a solution to a specific problem is sought, it is recognized that the...
Air Chamber Surge Tanks in High Head Hydro Plants
The U. S. Army Corps of Engineers Alaska District considered an air chamber during the design of the 'Crater Lake phase of the Snettisham Project near Juneau, Alaska. A conventional...
Design Considerations for Hydraulic Jump Structures
The primary purpose of this paper is to define the areal distribution of large-scale pressure pulses acting on the containment structure of a hydraulic jump. The results presented are...
Pressure Fluctuations on the Floow of Hydraulic Jumps
This paper presents the results of an experimental investigation regarding the variation of r. m. s. value of pressure fluctuations on the floor of free and forced hydraulic jumps formed...
Stepped Spillway Design with a RCC Dam
The hydraulic model study results for the Upper Stillwater stepped spillway design are presented. The studies encompassed several spillway geometries and design unit discharges ranging...
A Stratified Mixing Channel: Theory and Experiment
The performance of a deep and stratified mixing channel is assessed theoretically and experimentally. The channel has a rectangular cross-section, a negligible longitudinal slope and is...
A Mathematical Model for River Ice
Several computer models for simulating river ice conditions have been developed (Petryk, 1986). All of these models simulate frazil ice production, and the progression, erosion and melting...
Experiments on Culvert Flow
Laboratory experiments are described which were performed on small-scale models of smooth circular culverts of length-to-diameter ratio varying between 13 and 52, and longitudinal downward...
Hydraulic Design Limitations for Gravity Flexible (Non-Rigid) Plastic Pipes Flowing with a Free Water Surface
Hydraulic design limitations are necessary for gravity plastic pipes when designed for use as a sanitary sewer, flowing part full with a free water surface. The limitation for pipes designed...
Salinity Intrusion Predictions by Analytical Expressions
Salinity intrusion in estuaries has traditionally been predicted by use of physical models and more recently by numerical models. Analytic techniques have seen quite limited use because...
A Tidal Hydraulic Model of the C&D Canal
The Kalman filter combined with one-dimensional shallow water wave equation is applied to describe the tidal hydraulic behavior of the Chesapeake Bay and Delaware bay canal. This model...
Hydraulic Structures on Piles
Many hydraulic structures built in the early 1900's were founded on piles. Today, when these structures are analyzed as 'pile-supported', the analyses...
Dam Safety Improvements for Tolt River Dam
Studies were performed to identify measures to improve the safety of the project under earthquake and extreme flood conditions while permitting the owner to store additional water under...
Flume Measures Ultra-Wide Discharge Range
Advances in mathematical modeling in the mid-1970's have led to accurate modeling of discharge and energy loss characteristics of long-throated flumes. A complex long-throated...
Underwater Inspection of Hydraulic Structures
Improvements in diving equipment, and underwater testing and instrumentation devices in recent years have increased the value of underwater inspections and reduced the cost. This paper...
Rehabilitation Measures?Wanaque Reservoir System
The rehabilitation of Pompton Lake Dam and the dams of the Wanaque Reservoir System has provided the North Jersey District Water Supply Commission with a safe, dependable source of water...
Return to search