A Systems Reliability Approach to the Safety of Steel Connections
A methodology is presented to determine the probability of failure of steel connections using a systems approach. Results indicate that connection safety evaluations which do not use this...
Construction Loads on Floors: Results of a Survey
A survey of post-shorting construction loads on floors of multi-storey buildings is described. The estimated parameters of a probabilistic model of the peak (transient) loads are reported....
A Two-Stage Safety Assessment Methodology for Construction Activities
The control of construction activities requires the evaluation of the condition of the control attributes of interest. In order to develop the required methodology, a model of the construction...
Risk Based Optimal Fatigue Testing
Optimal fatigue life testing of materials is considered. Based on minimization of the total expected costs of a mechanical component a strategy is suggested to determine the optimal stress...
Time-Variant System Reliability Analysis Using Response Surface Methodology and Fast Integration
An approximate method is presented to solve the structural reliability problem of complex structural systems subjected to time-variant loads where the parameters of the structural system...
First-Excursion Probability of Uncertain Structures
The first-order reliability method (FORM) is used to estimate the first-excursion probability of uncertain structures subjected to deterministic dynamic loads. An algorithm is developed...
Risk Based Structural Optimization
Risk based structural optimization problems for structural systems are formulated on basis of a so-called risk index. The risk index is defined as a consequence modified reliability index...
Reliability-Based Optimization Using Sequential Quadratic Programming
This paper proposes a method for reliability-based optimization of large structures using the Stochastic Finite Element Method, including both component and system reliabilities. In SFEM,...
Structural System Design under Uncertainty Via Pareto Optimization
Structural systems are generally designed under safety, serviceability and economy requirements. The single objective optimal design problem of both deterministic and nondeterministic...
ASCE Review and Publication Process for Technical Journals
For many, the review and publication process for ASCE technical journals is not clear. Though the basic steps are outlined in the Authors' Guide, there are unwritten practices that may...
What Makes a Quality Paper?
A good paper is one that is easy for members of the intended audience to read and understand. It must contain an informative abstract. The introduction should include information on why...
Engineering of Controlled-Drainage Systems
Soil-water management by water table control (via a dual purpose subdrainage-subirrigation system) is becoming popular in humid regions of the U.S. and Canada. Controlled-drainage is an...
Degradation of Ground Water by Tetrachloroethylene
Ground water from many municipal water wells in California has been degraded by tetrachloroethylene (PCE) at concentrations above the drinking water standard. Investigations conducted...
Oklahoma's Ground Water Protection Strategy
This report examines Oklahoma's developing ground water protection strategy in light of the national strategy. We look first at relevant federal legislation and what EPA expects of a state...
Groundwater Management in Southern Florida
A water supply plan was developed by the South Florida Water Management District (SFWMD) for Hendry County, Florida as part of the Lower West Coast Water Supply Plan. In the course of...
Ground Water Management in Arkansas
Arkansas has historically enjoyed plentiful water and has typically resolved water conflicts with case by case application of common law. As agricultural, industrial and domestic water...
Evapotranspiration Data Management in California
This paper will discuss components of the California Irrigation Management Information System (CIMIS). CIMIS is an automated agricultural weather network operated by the California Department...
Use of the TETrans Model in Predicting ET Effects on Groundwater Quality
Recently Corwin and Waggoner (1991) developed a contaminant transport software package referred to as TETrans, (acronym for Trace Element Transport). TETrans is a useful preliminary assessment...
Predicting Water Quality as Affected by ET Using the Root Zone Water Quality Model
The Root Zone Water Quality Model (RZWQM) is a physically based simulation model used to predict water and solute movement running from, moving through, and leaching out of the root zone....
Irrigation Project Modernization
Project modernization for sustainable irrigation requires a design and operation plan which will provide water deliveries with flexibility and reliability at each level within the system....
Return to search