ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Nonlinear Quasi-Static and Transient Response Analysis of Shallow Shells: Formulations and Interior/Boundary Element Algorithms
Nonlinear integral equations are derived for the representation of displacements of shallow shells undergoing moderately large, quasi-static or dynamic deformations. A combined interior/boundary...

A Study on Non-Conforming Boundary Elements in Elastomechanics
This work is a critical study on the performance of non-conforming boundary elements in three-dimensional elastomechanics. The pervasive way of implementing the boundary element method...

3-D Flexible Embedded Machine Foundations by BEM and FEM
A study on the dynamic response of three-dimensional flexible massless foundations of arbitrary shape, embedded in a homogeneous, isotropic and linear elastic half-space and subjected...

Seismic Response of Pipes Supported on Complex Frames
Analytical approaches and modeling techniques used to calculate seismic responses of piping systems, supported on complex open-frame structures, are evaluated. Seismic responses are obtained...

Offshore Platforms Subjected to Wave Forces
The dynamic analyses of offshore platforms are mostly based on the lumped mass matrix method in the frequency domain. Although the approximations involved in the lumped mass matrix method...

Explosive Loading of Surface Ships
This paper describes the recent development of numerical methods which have accurately predicted the response of surface ships subjected to underwater explosion tests. The technique couples...

Some Applications of Fourier Series in Structural Optimization
This paper discusses the application of the method of truncated Fourier series to problems of structural optimization. It begins with a discussion of the range of the method which has...

Optimum Seismic Structural Design with Tendon and Mass Damper Controls and Random Process
This paper describes the optimization of structural weight for seismic structures implemented by active control systems. The instantaneous open-loop optimal control algorithm is used for...

Structural Optimization Under Conditions of Uncertainty, with Reference to Serviceability and Ultimate Limit States
Probability concepts and methods are rapidly gaining ground in the search for more rational approaches to structural optimization. Under conditions of uncertainty, the risk of unfavorable...

Reliability Constraint on Optimum Design
The purpose of the paper is to emphasize the importance of the probability concern on optimum design work. The probability of failure of the structure can be considered as one of the optimum...

Connection Panel Zone Deformation in Steel Frames
Conventional analyses of frameworks are usually carried out without considering the effect of panel zone deformation on frame behavior. As a result, center-to-center distances rather than...

The Effects of P-Delta and Semi-Rigid Connections on Response Behavior of Inelastic Steel Frames Subjected to Cyclic and Seismic Loadings
A numerical method is presented for analyzing semi-rigid connected steel frames subjected to various time-dependent excitations with consideration of damping, nonlinear material behavior...

Bidirectional Seismic Response of Simple Structures
For design purposes it has been common to consider that seismic excitations act in one direction at a time. Analytical studies over the past decade have indicated that this may not be...

The Credibility of Probabilities: An Application to Water Resources Policy
This paper focuses on one particularly troublesome issue in decision analysis, the issue of the credibility of subjective probabilities. A water resources policy problem is used to illustrate...

U.S. Bureau of Reclamation Use of Risk Analysis
The United States Bureau of Reclamation (USBR) has been using risk analysis techniques in assessments for management decisions. Before presenting USBR practice and experience, the paper...

The Use of ISMAUT in Determining the Most-Preferred Package of Alternatives
Multiattribute decision analysis serves as a useful model of alternative selection under risk. A specialized form of multiattribute decision analysis assumes that there is only one stage...

Microcomputer Application of the Florida Standard Urban Transportation Modeling Structure
Over the past five years the Florida Department of Transportation (FDOT), in conjunction with the twenty-one Florida Metropolitan Planning Organizations, has developed the Florida Standard...

Transportation Infrastructure Information Systems
The current crisis in the nation's transportation infrastructure necessitates the development of innovative data management systems to facilitate and implement analysis algorithms...

Uncertainty and Conservatism in the Seismic Analysis of Nuclear Facilities
Traditionally, seismic analysis and design of nuclear power plant structures are performed using deterministic procedures. In order to address the issue of the likelihood of failure, probabilistic...

Pipeline Frost Heave Predictions Using a 2-D Thermal Model
Chilled structures founded on initially unfrozen soils cause a zone or 'bulb' of frost to develop with time. This time period may be of seasonal duration, as...

 

 

 

 

Return to search