Damage Model for Buildings Subjected to Earthquakes
A model based on random vibration method is developed for assessing building damage to earthquakes. The damage of reinforced concrete structures is expressed as a linear combination of...
Stochastic Beams on Elastic Foundation
The finite difference method is applied to the second-moment analysis of beams on elastic foundation with random characteristics. The method is simpler than the stochastic finite element...
Design Considerations for Wind Loadings
The application of reliability concepts to the treatment of wind loadings on structures has increased in the past several years. Advances have been made in assessing the various uncertainties...
Seismic Probabilistic Risk Assessment for Critical Facilities
Probabilistic Risk Assessment (PRA) for seismic events is currently being performed for nuclear power plants. The background on seismic PRA is presented along with a basic description...
Computer-Aided Studies of Complex Soil Moduli
Low-cost microcomputers and new electronic components make it possible to measure accurately the phase and amplitude of mechanical waves in the frequency domain at a small fraction of...
Seismic Analysis of Horse Creek Dam, Hudson, Colorado
On April 8, 1981, six days after a Richter magnitude 4. 0 earthquake, inspectors from the Colorado State Engineer's Office discovered a small crack in outboard side of Horse...
Attenuating Creep of Piles in Frozen Soils
Results of several long-term creep tests of piles in frozen soils are analyzed; the primary or attenuating creep is predominant in most cases. For effective design of pile foundations...
Aesthetics of High-Rise Building Structures
The structural aesthetics of high-rise buildings is discussed, with particular emphasis on building frames, individual members and on joints and connections. Examples are given of towers...
Erosion, Productivity and Rangeland Watershed Planning
The Bureau of Land Management is responsible for the management of over 160 million acres of rangeland in the western United States. The principal uses of these rangelands are the grazing...
Characterization of Variable Soil-Water Properties
Hydraulic conductivity, water retention, soil bulk density, and clay content were analyzed on undisturbed soil cores obtained from different depths at sixteen locations in a 24 acre watershed....
Abutment Seepage at Smithville Dam
After initial filling there was concern for the stability of Smithville Dam when higher than anticipated piezometric levels were experienced in the left abutment foundation. Concern heightened...
A Case History of Leakage from a Surface Impoundment
A manufacturing company constructed a 48-acre (19 hectare), unlined surface impoundment at a site in northern Texas to store wastewater. The site is underlain by unsaturated, alluvial...
Water Balance Approach to Prediction of Seepage from Mine Tailings Impoundments, Part I: General Water Balance Approach
The prediction of seepage from a tailings impoundment requires careful evaluation because the predictions can have significant economic impact upon designs, as well as permit stipulations...
Seepage Control for Embankment Dams USBR Practice
The current Bureau of Reclamation approach to seepage assessment, analysis, and design for embankment dams is described. The advantages and appropriate applications for the analysis programs...
Grout Penetrability
The ability of a grout to penetrate a formation is always a selection requirement for projects in which fracturing is undesirable. The major grout properties affecting penetrability are...
Some Aspects of Analysis and Prediction of Subsidence
A procedure based on the nonlinear finite element analysis was investigated for the prediction of subsidence caused by longwall mining. This paper presents a case study involving predictions...
Application of Displacement of Discontinuity Methods in Underground Mine Design
Displacement discontinuity methods for stress analysis, pioneered by Starfield and Crouch (see, for example, Starfield and Crouch, 1972; Crouch, 1976; and Crouch and Starfield, 1983),...
An Application of Probability to Rock Slope Design
This paper describes the use of probability and statistics in the slope design process. An example is presented of a high rock slope in an open pit mine. This slope is a major concern...
A Combined Limit Equilibrium and Statistical Analysis of Wedges for Design of High Rock Slopes
This paper describes a unique technique developed for the statistical analysis of wedge failures which control the design of high slopes in relatively hard jointed rock masses. Using this...
Probability Applied to Slope Design?Case Histories
A major problem encountered with the choice of an appropriate value for the design probability. Initial experience, obtained during open-pit investigation, suggested that slope geometry...
Return to search