NCASI Enhancements of the QUAL-II Model
The mathematical water quality model QUAL-II has been modified to reflect advances in the understanding of algal, nutrient, and light interactions. Code changes were also made to incorporate...

Computer Simulation of Lime-Soda Softening of Cooling Waters
A computer model is developed to simulate the process of lime-soda softening of cooling waters. Results from the model are compared with those from a laboratory experimental study using...

A New Approach to Activated Sludge Plant Design
Activated sludge plants are designed on the basis of stationary tests at laboratory scale for constant organic loads and constant input flows. From these tests the kinetic parameters are...

Theoretical and Experimental Evaluation of Single-Activated Sludge
The objective of this paper is to discuss the results of operating a laboratory bench scale compartmentalized activated sludge unit operated at a hydraulic detention time ( theta ) of...

Integrated Assessment of the Acid Deposition Problem
To perform fully integrated assessments of the acid deposition problem it is necessary to combine models of all major aspects of the problem, including emissions, atmospheric transport,...

Three-Dimensional Simulation of Flow and Sewage Effluent Migration in the Strait of Juan de Fuca, Washington
The purpose of this study was to evaluate effects of a proposed sewage effluent discharge located in the Strait of Juan de Fuca just outside of Sequim Bay, Washignton. The three-dimensional,...

Geothermal Salt Recovery From Evaporating Ponds
The water from geothermal reservoir 'Los Azufres' in Michoacan, Mexico, is characterized by its high content of chloride, silica, borum and arsenic. Due to the...

Effect of Surge Cycle Ratio and Cycle Time on Infiltration
A recirculating furrow infiltrometer was used to simulate surge flow irrigation for various cycle times and cycle ratios. The data collected was used to evaluate two empirical surge flow...

Institutional Constraints and Evaluation of Potential Management Strategies on the Colorado River System
Management of the Colorado River reservoir system is a complex problem influenced by a number of institutional constraints including interstate compact agreements, international treaties,...

Yield-ET Functions in Irrigation Systems Design
A linear-programming (LP) framework and associated computer routines were developed to evaluate economics of deficit irrigation in system design and to optimize the sizing and operation...

Hurricane Evacuation Studies, an Overview of Major Analyses
The purpose of this manuscript is to present the methods employed, the types of data generated and the interrelationships of the major analyses conducted for a hurricane evacuation study....

Community Succession Modeling for Resource Management
The U. S. Fish and Wildlife Service is implementing community succession models to forecast the impacts of altered hydrological regimes on forested floodplains and coastal marshes. A pilot...

PVEM?A Model for Assessing Vessel Air Pollutants
The Port Vessel Emission Model (PVEM) is a computer program which calculates air pollutant emissions resulting from vessel activity in a port for various operations scenarios. These scenarios...

New Orleans Flood Gates Hydraulic Model Study
A hydraulic model study was conducted to evaluate the forces exerted on selected floodgates by flowing water as the gates are closed after flooding has begun. The results of the study...

Quantifying Florida's Coastal Storm Wave Susceptibility
A simple computer model capable of describing potential storm wave inundation and damage along Florida's sandy beaches is described from first principles. Model STORMWAVE...

Coral Reef Modeling: Key Largo Case Study
A numerical model called CORALSIM has been developed for the Key Largo Coral Reef National Marine Sanctuary in the Florida Keys. The model was developed as a management tool to study the...

Clay Pipe Installation?Advances in Load Factors
This report presents an evaluation of traditional load factor values for clay pipe and the development of a new bedding system which gives a higher load factor. Tests demonstrate that...

Sewer Construction Inspection and Testing
Sewer construction testing is the final portion of the team effort that started with the goal of meeting the requirement for a sewer system for the protection of health and environment....

Investigations into the Structural Performance of Clay Pipes
Over the past 8 years, the Clay Pipe Development Association (CPDA) has commissioned non-destructive physical testing of vitrified clay pipelines. The diameters of the pipes have varied...

Numerical Simulation of Soil-Pipeline Interaction in a Ground Subsidence Zone
In this paper, the flexural interaction between a buried pipeline and the surrounding soil is examined by employing a combined boundary element-finite element scheme. The flexural interaction...

 

 

 

 

Return to search