Reshaping Breakwaters on the Stability of Roundheads and Trunk Erosion in Oblique Waves
The stability of a berm type breakwater (sacrificial breakwater) was tested in a 3-dimensional model at The Hydraulics laboratory, Department of Civil Engineering, University of Aalborg....
Hydraulic Performance of Berm Breakwaters
In recent years, the concept of unconventional rubble mound breakwaters, i.e berm breakwaters, has gained much attention among researchers and engineers as an economical method to build...
Application of Computational Model on Berm Breakwater Design
The development of a computational model on dynamic stability is summarized. The model is able to predict profiles of slopes with an arbitrary shape under varying wave conditions. The...
Experimental and Historical Verification of the Performance of Naturlly Armouring Breakwaters
A series of hydraulic model test were carried out to investigate the mechanism by which naturally armoring breakwaters, that is breakwaters in which the initial profile is adjusted into...
The Development of a Design for a Breakwater at Keflavik, Iceland
A breakwater design was developed to be built using local quarried rock and relatively simple construction methods. The design significant wave height was 5.8 and the maximum depth of...
The Design and Construction of a Mass Armoured Breakwater at Hay Point, Australia
The design and construction of a prototype mass armored breakwater is briefly described. The paper also explores the practicality of allowing the progressive interaction of design, physical...
Unconventional Rubble-Mound Breakwaters?Concerns
A Seminar on Unconventional Rubble-Mound Breakwaters was held in Ottawa, Canada, on the 15th and 16th of September 1987. This paper is an attempt to summarize the general discussion that...
Computing in Civil Engineering
Microcomputers to Supercomputers
This book contains papers presented at the Fifth Conference on Computing in Civil Engineering. Computer applications in specific disciplines are covered. These include construction engineering...
Drawing up Waterproof Curtains
Curtain wall damage has recently become the number one source of building owner complaints. Until wall systems are designed with backup water collection systems and other details, leakage...
Considerations in the Design and Installation of Horizontally Drilled Pipeline River Crossings
The authors will present a review of directionally controlled horizontal drilling techniques for pipeline installation by describing the state-of-the-art of the process vis-a-vis subsurface...
Pipeline Curvature by Polynomial Approximation
Since start-up of the trans-Alaska pipeline in June of 1977, a variety of techniques have been investigated to monitor pipe settlement and evaluate associated pipe integrity. During the...
Pipeline Rehabilitation with Polyolefin Pipe
This paper provides an introductory discussion on the rehabilitation of a deteriorated pipe structure by insertion renewal with continuous lengths of polyolefin pipe. This sliplining or...
The Applicability of U.K. Sewerage Rehabilitation Techniques to the U.S.
The total length of public sewers in the UK is 160, 000 miles and in recent years there has been increasing concern over their conditions. Research spearheaded by the Water Research Centre...
The Cause of the Johnstown Flood
The Johnstown flood occurred in 1889, when an earth and rock dam failed during a record rainfall in eastern Pennsylvania. The flood was one of the worst civil disasters in the U.S.; 2,200...
Evaluation Procedures for Hydrologic Safety of Dams
Procedures are proposed for selecting the safety design flood for both new and existing dams. The procedures are based on a quantitative risk assessment in which the likelihood and consequences...
Soil Properties Evaluation from Centrifugal Models and Field Performance
The performance of geotechnical projects is dependent upon the appropriateness of the design theory to the boundary conditions, and the characterization of the soil properties used in...
Evaluation of Infiltration Equations Used in Surface Irrigation
Computer simulations of an irrigation event were conducted using 6 full hydrodynamic models. All 6 models used the same surface flow equations and a different infiltration component. The...
Hydraulic Studies of Surface Drainage from Level Furrows
Field studies have been completed to quantify the surface drainage phenomenon from level furrows which were rapidly flooded and then drained from the inlet end of the furrow. The proportion...
Furrow Irrigation Performance Using Real Time Control
Computer simulations were conducted, using a simple feedback control algorithm, to determine the potential for improvement of irrigation performance using real-time feedback control. Field...
Needed Social, Cultural and Design Changes to Successfully Manage Nigerian Surface Irrigated Projects
The aim of this paper is to illustrate the broad nature of problems associated with the faulty initial designs of water distribution network and irrigation methods and poor participartion...
Return to search