Akashi-Kaikyo Bridge Underconstruction
This paper presents 1) brief history of the survey work, 2) brief description of the physical dimensions and structural system, 3) major studies for the design, 4) development of higher...
Design and Construction of the Cable-Stayed Wooden Space Truss Roof
The thinning must be enforced for healthy development of an artificial forest. The most effective use of thinning lumber is construct of the space truss structure. This election systems...
Structural Analysis for Structural Design
This paper presents a simple extension to conventional structural analysis that serves to provide additional information that is of significant use to the structural design process. Specifically,...
Multiobjective Optimization of Actively Controlled Structures
A general methodology is presented for the multiobjective optimization of actively controlled structures. The methodology can handle structures involving precise as well as fuzzy data....
Modal Filter Based Structural Control of a Highway Bridge
An Adaptive Modal Filter (AMF) algorithm is developed which uncouples complicated multi-mode structural dynamic response into simple single-mode response. The application to active structural...
Rehabbing Bridges Under Traffic
Four urban examples demonstrate how an owner's decision to keep it open during rehabilitation construction forces the designers to contend with an extra set of problems. Reanchoring...
Success Syndrome: The Collapse of the Dee Bridge
Scaling up existing successful designs can cause latent weaknesses to become dominant, leading to catastrophe. By studying past failures where this has happened--for example, the 1847...
Road to Recovery
The effect of the Loma Prieta earthquake on San Francisco's elevated viaduct system is still being felt more than four years later. Immediately after the quake, the entire...
Recommendations for Standards in Hydraulics
Prepared by the Task Committee on Recommendations for Standards in Hydraulics of the Hydraulics Division of ASCE. This report investigates whether...
Modular Evolution
The construction industry typically thinks of modular steel bridges in terms of the World War II vintage Bailey Bridge. The Bailey Bridge was designed to be quickly deployed to replace...
Lightweight Concrete for a Segmental Bridge
Structural lightweight concrete can help increase the stiffness and decrease the mass of a bridge; both are qualities that make the structure more likely to survive an earthquake. Ordinarily,...
Modeling to Generate Alternatives in Discrete Structural Optimization
Structural design, like other complex decision problems, involves many trade-offs among competing criteria. While mathematical programming models are increasingly realistic, there are...
Analysis of I-Girder Highway Bridges
Analysis of a bridge superstructure is complicated by the general geometric and loading conditions. Presented in this paper are three dimensional finite element modeling techniques used...
Bridge Rating Using Influence Surface for Curved Bridge Structures
A fairly sizeable number of curved steel bridges in Louisiana need to be rated and influence lines required to be stored. A methodology is developed and rating procedures are established....
Computer Analysis of Continuous P/C Highway Bridge Girders with Variable Depth
A computational procedure and associated computer program were developed for the analysis and design of P/C continuous beams with variable depth. Using this program, continuous girders...
An Assessment of the Joint Factor as Used in the Modified MEXE Method
The finite element method has been used to examine the joint factor in the modified MEXE method which is documented in the publications (BD21/93 and BA16/93) by the Department of Transport...
Impulse Effect on Redundancy of a Tied-Arch Bridge
This paper studies the redundancy of a tied-arch bridge using a 3-dimensional finite element computer model. By using static incremental loading simulation, a tied-arch bridge designed...
Towards Practical Machine Learning Techniques
Most research on the application of machine learning to engineering problems have solved artificial problems. While research claimed to have reached results that would improve practice,...
The Development of an Expert System Used in Preliminary Design of Concrete Bridges
The importance of the selection of the best design on the one hand and the available knowledge, on the other during the preliminary design process asks after a different kind of software...
ESPADD.BR: Expert System Producing Automated Designs and Drawings for Bridges
This paper presents the logic and methodology used in developing an automated software system for designs and drawings of bridges. Its primary purpose is to design and draw highway bridge...
Return to search