Nonlinear Buckling Response of Single Layer Latticed Barrel Vaults
Elastic overall buckling of single layer latticed barrel vault roof structures under static vertical loading is investigated using a fully nonlinear finite element solution procedure and...
Experimental Study on the Strut Type of Cable Net Membrane Structures
In this paper a new type of suspension membrane structure combined with a cable net is proposed, in which the supporting struts are arranged between the membrane surface and the cable...
Form Finding Numerical Methods for Tensegrity Systems
The rigidification of Tensegrity Systems is related to selfstress states which can be achieved only when geometrical and mechanical requirements are simultaneously satisfied. This paper...
Seismic Performance and Retrofit of the Golden Gate Bridge
Since its opening in 1937, the Golden Gate Bridge has endured and functions as an important transportation link for Bay Area commerce and commuters. After an earthquake in 1989, T.Y. Lin...
Akashi-Kaikyo Bridge Underconstruction
This paper presents 1) brief history of the survey work, 2) brief description of the physical dimensions and structural system, 3) major studies for the design, 4) development of higher...
Study on Reinforced Concrete Cylindrical Shells with Edge Members under Impact Loading
The strength, cracking patterns and the other nonlinear dynamic behaviors of reinforced concrete roof-type circular cylindrical shells influenced by edge member stiffness and supporting...
Lateral Response of Unreinforced Masonry Infill Frame Panels
This paper presents the results of the out-of-plane testing phase of the National Science Foundation Grant BCS 9102347. This project addresses the out-of-plane response to lateral loading...
Optimization for Earthquake Loads
Structural optimization for seismic loads can be approached from a deterministic or nondeterministic point of view. Deterministically, the major difference between optimization of statically...
Flange Local Buckling and Behavior of I-Sections
A simple kinematic model is proposed to determine the locally buckled shape of the compressive flange plate of I-sections subjected to pure bending or bending combined with axial thrust....
A Field and Modeling Study of Residual Circulation in Sarasota Bay and Tampa Bay, Florida
Based on analysis of current data at three distinct locations within the Sarasota/Tampa Bay system, we defined the residual circulation patterns and the relative influences by tides, wind...
Design, Construction, and Maintenance of Relief Wells
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 3 This engineering manual provides guidance and information...
Evaluation of Depth-Limited Wave Breaking Criteria
Numerous criteria exists for predicting incipient wave breaking. These criteria were verified with a limited number of data sets or under limited number of data sets or under limited beach...
Design of an In-Situ Directional Wave Gage for One Year Deployments
This paper describes the design and implementation of a new in-situ, directional wave gage that records hourly directional spectra continuously during a 13-month deployment period. If...
Design and Testing of the NDBC Wave Processing Module
The U.S National Data Buoy Center (NDBC) has developed a new wave data acquisition and processing system, called the Wave Processing Module (WPM), using state-of-the-art technologies and...
Buoy Directional Wave Measurements Using Magnetic Field Components
Directional wave data can be estimated using the heave, pitch and roll motion of a discus buoy, which are conventionally measured by a pitch-roll sensor. To reduce the size and cost, this...
Evaluation of a Third-Generation Wave Model for the U.S. Atlantic Coast
Accurate description of surface wind fields in ocean spectral wave modelling is of critical importance to estimating storm - induced wave conditions along a coastal reach. A new approach...
Wave Monitoring in The Southern California Bight
An overview of recent research by the Coastal Information Program (CDIP), aimed at effectively monitoring wave conditions in the Southern California Bight, is presented. The topographic...
Experimental Study of Monochromatic Wave-Ebb Current Interaction
Laboratory experiments were conducted in a 26-m by 36-m basin with a 1:30 plan beach to study the interaction of monochromatic waves and an ebb current in and near shallow entrance channel....
Wave Runup on and Wave Reflection from Coastal Structures
Wave runup and wave reflection are two of the most important, easily quantifiable variables that influence the design of coastal structures. Unfortunately there are very few comprehensive...
Wave Transformation and Load Reduction Using a Small Tandem Reef Breakwater ? Physical Model Tests
The performance of several small reef breakwaters, and a tandem breakwater system (consisting of a reef breakwater positioned upwave from a surface-piercing main breakwater), are quantified...
Return to search