Influence of Epoxy Coating on Stress Transfer from Steel to Concrete
To assess the influence of epoxy coating on the bond characteristics of reinforcing bars, a series of tests was conducted to determine differences in stress transfer between coated and...
The ENF Test: Critical Analysis and Computational Modelling
We have developed an experimental and computational strategy to moderate the experimental scatter of the interlaminar fracture toughness values (GIIc)...
Asphalt Age Hardening?Trends and Predictions
Pavement cracking is substantially related to the consistency of asphalt cement binders. The variation in hardness of binders is related primarily to asphalt characteristics, environment...
Applications of X-Ray Imaging in Soil Mechanics
This paper presents a summary of the principles of methods to observe the detailed patterns of local deformation within a soil mass: stereophotogrammetry, polaroscopy, infrared tomography...
Rate Effects in the Deformation of Rocks
This paper gives a brief review of creep and rate effects on the behavior of rocks, within a wide range of confining pressures and temperatures, and with a special emphasis on the physical...
An Extended Mixture Approach for Modeling of Fiber Reinforced Cementitious Materials
A rate-independent, anisotropic model for Fiber Reinforced Cementitious Materials (FRCMs) is presented. A continuum damage/plasticity model for the concrete and an effective fiber model...
High Performance Fiber Reinforced Cement-Based Composites
Fracture of cement-based composites reinforced by the relative high fiber volume is studied. Crack propagation and damage distribution were examined by laser holographic interferometry....
Material Properties Related to Pavement Performance
As part of the Strategic Highway Research Program, an effort has been made to review research literature which can be used to relate asphalt properties to pavement performance. This report...
Beam-To-Column Connections for Pultruded FRP Structures
Moment-rotation and strength characteristics of beam-to-column bolted connections of fiber reinforced plastic (FRP) pultruded wide-flange structural shapes are discussed. Results of experimental...
Displacement Measurement by Laser Interferometry and Image Analysis
Laser holographic interferometry was used for the evaluation of displacement fields on concrete and fiber reinforced concrete specimens. Transmission holography was used to analyze mortar...
50th Anniversary of the Hydraulic Division 1938-1988
This publication consists of the papers presented at the special sessions of the 1988 ASCE National Conference on Hydraulic Engineering held in Colorado Springs, Colorado, August 8-10,...
Aussie Steel
The 50-story Chifley Square Building being built in Sydney will be the tallest Australian steel building. Scheduled for completion in June 1992 at a cost of $310 million, it will house...
Behavior of Structures During Earthquakes
Originally published in: Journal of Engineering Mechanics Division, ASCE, EM4, October 1959, pp. 109-129...
Vibrations of Linearly Tapered Cantilever Beams
Originally published in: Journal of the Engineering Mechanics Division, ASCE, EM2, April 1962, pp. 95-123...
Natural Periods of Buildings
Originally published in: Journal of the Engineering Mechanics Division, ASCE, EM4, August 1963, pp. 31-65...
Generation of Artificial Earthquakes
Originally published in: Journal of the Engineering Mechanics Division, ASCE, EM1, February 1964, pp. 113-150...
Ambient Vibration Tests of a Suspension Bridge
Originally published in: Journal of the Engineering Mechanics Division, ASCE, EM5, October 1978, pp. 983-999...
Progress in Hydromechanics
The historical development of hydromechanics in the fifty years since the founding of the Hydraulics Division is reviewed. Rouse's 1938 text, Fluid Mechanics for Hydraulic Engineers, provided...
Superstructure: Statics Discussion
This chapter briefly discusses the statics of the Colossus....
Transmission Line Insulator Assembly Reliability
Transmission line insulator assemblies made up of ceramic or composite insulators and associated hardware are used to mechanically support and electrically isolate energized conductors...
Return to search