High-Resolution Upwind Schemes for Solving Mass Transport Equation
A fractional-step algorithm is employed to solve the mass transport equation by decomposing the advection-dispersion equation into two portions, pure advection and pure dispersion. High-resolution...
Numerical Simulation of One Dimensional Transcritical Flow
The term transcritical flow describes the existence of both subcritical and supercritical flow simultaneously within the computational domain. Transcritical flow situations are encountered...
Depth-Averaged Flow Model in Curvilinear Coordinates
Implementation of a depth-averaged model in orthogonal curvilinear coordinates permits to resolve questions about grid refinement, the representation of complicated boundaries, and the...
Treatment of Nonhomogeneous Terms in Flow Models
A study of the relative significance and treatment of nonhomogeneous terms in unsteady open-channel flow simulation models has been conducted. The effects of nonhomogeneous terms including...
Use of a Modified Hybrid Model to Analyze the Effectiveness of Jetties in Reducing Marina Sedimentation
The effectiveness of the construction of jetties near the entrance channel of a coastal marina in reducing marina sedimentation has been analyzed using a modified hybrid model. The modified...
Use of FESWMS-2DH for the Attaway Road Bridge Repair Project
The paper presents the application of the Finite Element Surface Modeling System: Two Dimensional Flow in a Horizontal Plane (FESEMS-2DH) computer program in the Attaway road bridge repair...
A Wind Driven Lake Circulation Finite Element Model for the Upper St. Marys River
The hydrodynamics of the Upper St. Marys River is simulated by a three dimensional steady state finite element model. The rigid lid and hydrostatic pressure assumptions are used in the...
Boundary Conditions and Flow Patterns in a Mountain River
Flood flow patterns in mountain valleys may be influenced by longitudinal variations in channel and valley morphology and by temporal variations in boundary conditions. This study utilizes...
3D model verification for a groyne and harbor experiment
A discussion of 3D model verification and calibration based on measurements in a flume is carried out for different test cases (groyne, harbor). The measurement data is available for public...
Sediment Transport in Sewers and Design Implications
Extended studies on sediment transport in sewers were conducted at the University of Newcastle upon Tyne and using this new as well as previously available data an attempt has been made...
Problems of Stream Flood Simulation and Prediction
The article presents a report on the natural flooding in a stream and the problems encountered when simulating and predicting stream floods. The complexity of flood characteristics, the...
An Interagency Overview of Selected Stream Sedimentation Models
The author's experience in developing stream sedimentation models is presented. The interagency study consisted of three phases. Phase one involved making an inventory of the computer...
Numerical Experiments on Instability in Unsteady Flow Modeling
The problem of numerical instability in modeling unsteady open-channel flows is investigated using the technique of numerical experiments. The model is based on the one-dimensional de...
Fortification of MMOC Models for Steep-Channel Flows
The Multimode Method of Characteristics(MMOC), designed to solve unsteady flows, is a new comprehensive scheme formulated by merging several individual characteristic schemes of the specified-time-interval...
Numerical Modelling and Laboratory Verification for the Turbulent Flow Field in the Branching Channel
Adopting the depth-averaged k-? turbulence model and using the finite volume method and SIMPLE procedure, the turbulent flow field in the branching channel is numerically solved and verified...
Partnering for Success
Partnering as a method of doing business is spreading throughout the construction industry. With everyone fed up with the litigious nature of the industry, partnering represents an opportunity...
Safety at the Site
The engineer should not be responsible for safety at the construction site. Most standard contract documents allocate this responsibility in construction means, methods and sequences to...
GPS Goes Real Time
This paper discusses the feasibility of Trimble Navigation's Site Surveyor System using Real-Time Kinematic (RTK) technology for conducting cadastral surveys. The use of RTK...
Existing Sewer Evaluation and Rehabilitation
This manual,
DSM Saves the Dam
The Miami Conservancy District built five flood control dams after the catastrophic flood of 1913 in Dayton, Ohio. Lockington Dam was one of these five hydraulic fill structures. The Ohio...
Return to search