Steel Panel Encased R.C. Composite Shear Walls
In order to make clear the fundamental resisting mechanisms of composite shear walls, tests are carried out on the composite unit rigid frames with various infilled shear walls. Composite...
Effects of Connections on Composite Frames
This paper summarizes the preliminary findings from an experimental and theoretical study of the influence of composite connections on frame behaviour. The first part of the work included...
The Behaviour of Reinforced Concrete Beams Manufactured with Side Profile Sheets
The paper describes in qualitative terms the fundamental principles that control the behaviour of a completely new form of construction in which reinforced concrete beams are constructed...
Joint Outfall H Relief Trunk Sewer System
The Joint Outfall 'H' Relief Trunk Sewer System consists of the construction of 11.3 kilometers (7 miles) of polyvinyl chloride lined reinforced concrete pipe varying in diameter from...
An Evaluation of Fiberglass Pipe Made by Three Different Manufacturing Processes for use in Water Transmission Projects
Fiberglass pipe is made primarily using continuous filament wound process, discontinuous helical filament wound process, and centrifugal cast process. Some 40 countries around the world...
Reinforced and Prestressed Concrete Pressure Pipe Diagnosis
Prestressed and reinforced concrete steel cylinder pipes are used for transmission mains, water intake lines, sewers force mains. Many collapses caused by the steel cylinder attack were...
Relocating a 54-Inch Diameter Force Main without Interrupting Wastewater Flow
The City of Tampa, Florida, was faced with the challenge of relocating three segments of an old 1372 mm (54-in.) diameter reinforced concrete pipe force main, totaling nearly a mile in...
Pipelines Crossing Highways and Railroads by Tunneling
When new pipeline construction requires the crossing of highways and railroads, a pipeline is generally installed in pipe or tunnel linear plate encasement which has been installed by...
Controlling Corrosion in Bridge Structures
The overall objectives of the Structures Research Area of the Strategic Highway Research Program (SHRP) were to provide methods to protect chloride-contaminated concrete components against...
Electrochemical Treatment and Protection: Lessons Learned
Corrosion is recognized today as one of the major contributors to the deterioration of steel reinforced concrete structures. Two electrochemical techniques, chloride removal and cathodic...
Selecting Bridge Protection and Rehabilitation Options
This paper describes a recently developed procedure for use by bridge engineers making protection or rehabilitation decisions for concrete bridges. The methodology determines the most...
Cathodic Protection for Protecting Prestressed Concrete
Due to the good effect of corrosion protection of reinforcing steel bars, even in concrete highly chloride contaminated, cathodic protection for concrete structure now carried out as a...
Plastic Potential
Some 220,000 tons of epoxy-coated steel has been used in the construction of bridge decks since 1987, but some have raised questions about its long-term durability. New materials for prestressing...
Bonded Concrete Overlays for Rehabilitation of Continuously Reinforced Concrete Pavement
As a result of the 1991 Intermodal Surface Transportation Efficiency Act (ISTEA), significant funding is now available for the rehabilitation of the nation's Interstate highway system....
Silica Fume Concrete: A Solution to Steel Reinforcement Corrosion in Concrete
This paper discusses the utilization of silica fume concrete admixture to prevent reinforcing steel corrosion. The mechanism of steel corrosion in salt impregnated concrete is described,...
Properties of Bottom Ash-Based Composite
High-calcium bottom ash, a by-product of the electric power industry, was evaluated for feasibility of use as a fine aggregate in structural grade concrete. Both fresh and hardened properties...
Characterization of Man-Made Vitreous Fibers by Image Analysis
This paper deals with the characterization of man-made vitreous fibers (MMVF), seen as an application of the techniques of image analysis and mathematical morphology. We present the whole...
Application of Radar Imaging Techniques to Concrete
Wideband radar imaging techniques have the potential of being a powerful tool in detecting steel reinforcing bars and delaminations inside concrete. The success of the method as a nondestructive...
Resin Modified Pavement in Airfield Applications
The resin modified pavement (RMP) is a composite paving material that combines the flexible characteristics of an asphalt concrete (AC) material with the durability of a portland cement...
Rehabilitation of Runway 4R-22L at Chicago's O'Hare International Airport
This paper describes the systematic process that was used to develop a rehabilitation strategy for the busiest runway at O'Hare International Airport. Any rehabilitation alternative that...
Return to search