Management of Spent Nuclear Fuel in Sweden?Experiences and Plans
The principle adopted for the management of spent nuclear fuel from the Swedish reactors is final disposal without reprocessing. During the 1980ies systems and facilities for the transport...
Taipower's Spent Fuel Interim Storage Program
Given the original designs, the existing six nuclear power units of Taiwan Power Company will lose full core discharge capability before end 1990's. To timely fulfill additional spent...
1992: When Things Began to Move at Yucca Mountain
This paper examines progress made on the Yucca Mountain Site Characterization Project (YMP) during 1992 and continuing into 1993. In addition, it discusses and describes design work on...
Status and Progress Monitored Retrievable Storage Project
The past year has been substantive changes within the Monitored Retrievable Storage (MRS) Project. This paper will present the status of the Project, review the progress made over the...
Multi-Purpose Canisters as an Alternative for Storage, Transportation, and Disposal of Spent Nuclear Fuel
A study was conducted to assess the feasibility of using multi-purpose canisters to handle spent nuclear fuel throughout the Civilian Radioactive Waste Management System. Multi-purpose...
A Multi-Purpose Unit Concept to Integrate Storage, Transportation, and the Engineered Barrier System
The Multi-Purpose Unit (MPU) is a new concept for standardizing and integrating the waste management functions of spent fuel storage, transportation, and geologic disposal. The MPU concept...
A Concept to Combine DOE Waste Minimization Goals with Commercial Utility Needs for a Universal Container System for Spent Nuclear Fuel Storage, Transportation, and Disposal
The concept of storing, transporting, and disposing of spent fuel using a single package, which has obvious advantages, is put forward. It is coupled with using contaminated scrap metal...
Comparison of Predicted Far-Field Temperatures for Discrete and Smeared Heat Sources
A fundamental concern in the design of the potential repository at Yucca Mountain, Nevada is the response of the host rock to the emplacement of heat-generating waste. The thermal perturbation...
The Analysis of Repository-Heat-Driven Hydrothermal Flow at Yucca Mountain
To safely and permanently store high-level nuclear waste, the potential Yucca Mountain repository site must mitigate the release and transport of radionuclides for tens of thousands of...
The Results of Near-Field Thermal and Mechanical Calculations of Thermal Loading Schemes
Two waste emplacement schemes, borehole and in-drift, are under evaluation as potential repository drift geometries for the Yucca Mountain Site Characterization Project. Calculations were...
Systems Implications of Repository Thermal Loading
A study was conducted to determine if implementation of a hot, cold or intermediate repository thermal loading strategy would have specific impacts on the overall Civilian Radioactive...
Code Requirement for Concrete Repository and Processing Facilities
Because of varied uses and performance/safety requirements of concrete for high, medium and low level radioactive wastes, a review of the current ACI 349 Code document was carried out...
Critical Stresses in Nuclear Waste Container Under Normal Handling Conditions
Critical stresses in the pintle, flat tophead, canister shell, the bottom plate and in the weldment of a high level nuclear waste canister are evaluated under a variety of static and dynamic...
Influence of Deterministic Geologic Trends on Spatial Variability of Hydrologic Properties in Volcanic Tuff
Hydrologic properties have been measured on outcrop samples taken from a detailed, two-dimensional grid covering a 1.4 km outcrop exposure of the 10-m thick nonwelded-to-welded, shardy...
Evaluating Soil Moisture and Hydraulic Conductivity in Semi-Arid Rangeland Soils
The United States Department of Energy's Office of Civilian Radioactive Waste Management (DOE-OCRWM) Fellowship Program supports various disciplines of academic research related to the...
Rock Mass Mechanical Property Estimation Strategy for the Yucca Mountain Site Characterization Project
Rock mass mechanical properties are required in the design of repository drifts and ramps to assess the impact of thermal loads from the heat-generating wastes on excavation performance...
Development of 3-D Lithostratigraphic and Confidence Models at Yucca Mountain, Nevada
Computerized three-dimensional geologic models of potential high-level nuclear waste repositories such as Yucca Moutain, Nevada, are important for visualizing the complex interplay of...
Estimation of Water-Filled and Air-Filled Porosity in the Unsaturated Zone, Yucca Mountain, Nevada
The responses of density and dielectric logs are formulated in terms if the matrix properties, air-filled porosity and water-filled porosity. Porosity values obtained from logs from borehole...
Effects of Core Sealing Methods on the Preservation of Pore Water
Five general core sealing methods (using Protecore, Lexan, wax, Protecore with wax, and Protecore with Lexan) were studied over a two year period to determine their moisture retention...
Instrumentation Requirements for the ESF Thermomechanical Experiments
In situ thermomechanical experiments are planned as part of the Yucca Mountain Site Characterization Project that require instruments to measure stress and displacement at temperatures...
Return to search