Application of the Ackers-White Procedure for Transport by Size Fractions and Testing in HEC-6
Modification of the Ackers-White method for the calculation of sediment transport by size fractions has led to a procedure which not only permits such calculations, but also increases...
Municipal Stormwater Management Ordinance Development and Implementation in Pennsylvania
This paper discusses the critical planning and engineering components of a sound stormwater management ordinance and how they can be shaped to avoid commonly encountered basin-wide implementation...
The Hydraulic and Hydrological Interactions Between Urban Sewer Systems and Receiving Waters at High Discharges
In the transition region from sewer to river, the penetration of river flood water into the sewer network or the hydraulic overload of small rivers due to sewer system discharges, may...
Evaluation of the Potential for Release of Residual Coal Tar by Flood Scour at a Superfund Site
To address the potential for release of residual coal tar by flood scour, stream cross-sections, stream discharge and sediment grain size data were collected during the Remedial Investigation...
A Generalized Diffusion Wave Flood Routing Model
A generalized diffusion wave model for flood routing is presented. The model can incorporate detailed data on natural cross sections and river bed geometry. An accurate numerical method...
An Expert Advisor for Selective Withdrawal Operations
A rule-based computational advisor that aids in the selection of selective withdrawal operations for project release temperature maintenance is discussed. This advisor couples a one-dimensional...
Maintenance Scheduling for Water Resource Systems: An Application to Advance Maintenance Dredging
A number of investigations have been performed in the recent years to analyze the effect of advance maintenance and to see if it is justifiable. These studies gave promising results but...
Development of a Computer Aided Decision Process for Channel Rehabilitation and Watershed Enhancement Techniques
To assist the engineer in planning and design of channel stabilization measures, an expert system (CADWET) was developed using a commercially available expert system shell program. The...
Equivalence Between Regular and Irregular Waves in Movable-Bed Models
Laboratory experiments were conducted to evaluate various irregular wave parameters to determine which provides the best match for the regular wave parameter used to develop design guidance....
The Calculation of Flushing Flows for Gravel and Cobble Bed Rivers
Flushing flows are needed to remove fines and sand from a gravel or cobble bed river. A natural stream will have periodic high flows adequate for flushing of fines and sand, but the hydraulic...
Physical Forces Generated by Barge-Tow Traffic Within a Navigable Waterway
Movement of navigation traffic such as barge tows within a restricted inland waterway such as the Illinois, Mississippi, or Ohio Rivers can and will alter the flow field in and around...
Data Acquisition for Determining the Physical Impacts of Navigation
Research is being conducted to determine the physical effects of navigation on the Upper Mississippi River System (UMRS). Extensive field data on various aspects of physical effects of...
Prototype Measurements of Flows Induced by Navigation Tows
Present projections of growth of commerical navigation traffic indicate that annual tonnage per tow and/or number of tows will continue to increase through the foreseeable future. In order...
The Equivalence of Path and Node Methods for Water Distribution Network Analysis
This paper deals with the equivalence between commonly employed methods, path and node adjustment methods, for analyzing water distribution networks. The basic equations for steady-state...
Coronarization of the Autonomous Water pump
The conventional hydraulic pressure multiplier has been successfully used by Belgian technician Robert Houman (1986) to provide a dependable source of water supply to the NATO-base at...
Performance Test of Some Selected Sediment Transport Formulas
Performance of some selected sediment transport formulas was tested using a parameter-sensitivity analysis and a series of numerical experiments with an imaginary channel data. Selection...
River Sediment Discharge Study?San Diego Region
Procedures and general results are presented of a recent study performed to estimate the average annual sediment delivery (sand sizes and larger) from sources discharging to the southern...
The Study and Practice of the River Regime Planning and Sediment Management in Gezhouba Project of the Yangtze
Based on the Practice of Gezhouba Project, the first water control project on the mainstem of the Yangtze and the largest hydroproject in China, this paper lays emphasis on importance...
Grid-Induced Errors in Depth-Averaged Flow Fields
A computer code called CH2D (Curvilinear Hydrodynamics in Two Dimensions) for computing depth-averaged free-surface flow fields has been used to assess the impact of the rate of change...
Two-Dimensional Floodplain Modeling
A two-dimensional horizontal finite element numerical model (RMA-2) was applied to a 15 mile (24 km) river channel-floodplain reach in West Germany. Previous applications of such models...
Return to search