Earth Pressure and Surface Load Effects on Buried Pipelines
Rational techniques for analyzing earth pressure and surface load effects, based on finite element analysis methods, have been developed and applied extensively to the design of buried...
Dynamic Responses of Buried Pipelines
The dynamic responses of the pipelines are analyzed by the continuous mass matrix method by considering the soil as a bounded plane in which the pipeline is placed. The friction between...
Long Term Testing of Centrifugally Cast Glass Fibre Reinforced Plastic Pipes (RIRP)
The paper discusses testing of pipe manufactured by centrifugal molding. The tests included external load tests, internal load, hydrostatic internal pressure, and cyclic internal pressure....
Characterization of Soil Arching Above Buried Conduits
Conventional ways of assessing the effects of soil arching over buried conduits were examined by means of finite element analyses. It was found that neither of the conventional soil arching...
Longitudinal Stresses in Buried Pipes
Longitudinal stresses are inevitable in buried pipes even in pipes with gasketed joints. Longitudinal stresses in any pipe section are cumulative. They include stresses due to soil friction...
Stress and Strain Responses of a Soil-Pipe System to Vehicular Traffic
A 16-in. natural gas pipeline near Racine, Wisconsin, had been in service for some 30 years. In 1982 road widening operations on a line parallel with the pipe presented the opportunity...
KEMCOR?A Chemical and Corrosion Resistant Piping System
KEMCOR is a new underground composite pipe system designed for chemical process use in such industries which require a high degree of corrosion resistance to varying concentrations and...
Response of Buried Flexible Plastic Conduits Under Loading
Structural performance of 75 mm and 100 mm diameter plastic conduits embedded in Lloyd clay were examined experimentally in a laboratory soil bin, and numerically by the finite element...
Large Diameter Plastic Pipe Design
This paper presents a rationale for the design of large diameter plastic pipes for gravity flow applications. This procedure, applicable for all plastic pipes, adapts state-of-the-art...
Design of Non-Pressure Very Flexible Plastic Pipe
There is considerable debate about the correct structural design procedure to be used for very flexible plastic pipe (VFP) - typically glass-fiber reinforced pipe (GRP), reinforced plastic...
Proportioning Reinforcement for Buried Concrete Pipe
The proportioning of reinforcement between inner and outer cages that is specified in ASTM Standard Specification C76 for concrete pipe in sewer and culvert applications is examined in...
Predicting Overland Flow and Infiltration
The kinematic overland flow and the Green-Ampt infiltration equations are coupled and rewritten in terms of several nondimensional parameters. Constant values of these parameters imply...
Aggregation and Consolidation of Phosphatic Clays
The consolidation behavior of aggregated phosphatic clays has been investigated using a bench scale centrifuge. It was determined that aggregation of the clays with phosphogypsum, a waste...
A Two-Dimensional Numerical Model of Thermal Discharges in Coastal Regions
This paper describes a two-dimensional numerical model of thermal discharges in coastal regions. The model uses potential flow theory to calculate the ambient velocity field of the coastal...
Numerical Modelling of Pollutant Transport from a Pond to a Stream
The problem of transport of pollutants in groundwater flow from a polluted shallow pond to a natural stream is considered. A numerical model predicting changes in quality of ground water...
South Branch Rockaway Flood Water Study
The paper reports on a study to analyze in detail various methods of storm water management. The technical studies were carried out in an actual watershed setting to arrive at a recommended...
Control of Select Priority Pollutants in Stormwater
A simulation program to generate the runoff quantity and quality for each storm event over a 5 year period was written. Chemical loading rate data from highways was used. Runoff was considered...
Computer Model Study of a Contaminated Well Field-Groundwater Pollution Source Identification and Contaminant Plume Simulation
Toxic waste contamination is currently threatening the public water-supply wells of the Town of Vestal, New York. As a practical tool to assist the remedial investigation, a two-dimensional...
Entrainment of Interstitial Water by Overland Flow
The paper reports on a study to investigate the entrainment of interstitial soil water by overland flow. A diffusion model was developed to describe the subsurface concentration and the...
Turbidity Control Measures Associated with Reclamation of an Abandoned Phosphatic Waste Clay Pond
Area 3A in the Tenoroc State Reserve near Lakeland, Florida is an inactive and abandoned phosphatic waste clay area. The disposal area has been inactive for several years and the clays...
Return to search